thanks anyway Bmoussay
Statistics: Posted by ethnix73 — 07 Apr 2009, 22:57
]]>
]]>
Maybe you shoulc try with the "midi dispatcher" script, to dispatch your polyphonic message into monophinic ones as soon as it enters the patch. Then you simply deal with each mono message to achieve what you want.
Hope it can help.
Regards,
B.
Statistics: Posted by bmoussay — 05 Apr 2009, 23:06
]]>
sending trial chord from live , just simple midi in module, i can catch only 2 notes max.
tested as well unpack and lowest bloc calculation, seems to confirm the pb....
Statistics: Posted by 23fx23 — 05 Apr 2009, 14:48
]]>
The problem is coming either from the midi in or the midi filter module.
If you play a triad chord (i've put a counter to observe this):
- the outlet "send" from the midi filter module does not always send three "impulses".
-the outlet "receive" from the midi in seems to react in the same manner than the midi filter.
I have activated the unpack fonction but it did not solve the problem
I've set global speed to the lower settings possible in asio set up.
Do you encounter the same problem fellow usiners, or does it come from my midi hardware?
Statistics: Posted by ethnix73 — 05 Apr 2009, 12:25
]]>
One "midi filter" (up in this image) filters note on, and the other one note off.
This subpatch is linked to three piano roll (or more). The three "play" data outlet to the inlet "play" of each piano roll, and the same for the 3 "stop" outlet to the 3 "stop" inlet of the piano rolls. Pitch is treated outside of this patch with some "change scale module"....
I'm not able to play chords and i doesn't understand why!!! Do you see another way to do this?
Statistics: Posted by ethnix73 — 03 Apr 2009, 20:57
]]>
Setting A=B with the block parameter on seems to solve the problem i was encountering.
Thanks for your help
When my patch will be ready, i will post a midisampler with polyphony.
Statistics: Posted by ethnix73 — 01 Apr 2009, 21:26
]]>
Statistics: Posted by ethnix73 — 01 Apr 2009, 21:18
]]>
and a
pass event flow
ex :
if A = 35 , pass to out 1....
if B = 42 pass to out 2
?
Statistics: Posted by nay-seven — 01 Apr 2009, 21:06
]]>
]]>
]]>
I've got a data stream (for example 35, 42 and 47). They can arrive in my patch nearly at the same time. Each values are routed to a different data outlet ( for example 35 to out 1, 42 to out 2, 47 to out 3). No problem with this, i've been able to do it with a counter and a dispatch module...
But the same values arrive a second time, with a different order. How can i send these values to the same data output as the first ones?
Statistics: Posted by ethnix73 — 01 Apr 2009, 18:38
]]>