also looking for an auto_dectect of peaks by analisys of wavform array. if some has code idea for that
'amplitude over time ' detection (vs absolute detection) on array s let me know...
I am definitely looking forward to this. this would make the REX-like functionality complete.'amplitude over time ' detection (vs absolute detection) on array s let me know...
Statistics: Posted by soundmind — 12 Oct 2010, 22:34
]]>
....also looking for an auto_dectect of peaks by analisys of wavform array. if some has code idea for that
'amplitude over time ' detection (vs absolute detection) on array s let me know...
Statistics: Posted by 23fx23 — 12 Oct 2010, 15:23
]]>
Statistics: Posted by 23fx23 — 11 Oct 2010, 17:18
]]>
]]>
]]>
]]>
and 2 or 3 % cpu very good groove machine and i get it in full sight in IB very fine
@ Nay morphusine is OK in IB i like it too
in later
Statistics: Posted by waolelaid — 14 Sep 2010, 07:05
]]>
I find some audio from the graphic card ATI I also have USB audio and SPDIF
I believe that all those audio derange the external sound card we tried the card
on my daughter computer Mac in 5 minutes all goes right tested with logic
I have contacted the technical support of presonus who explain me all the things
to do as disable the internal sound card but i didn't disable all
well i stop here i must gather all the manipulations I did
and I open a new thread
thank again i'm going to eat
Statistics: Posted by waolelaid — 13 Sep 2010, 21:18
]]>
about asio4all , this don't work only with your internal sound card , you can also choose your reel sound card in his panel
here you can see my internal sound card + 2 others soundcard
Statistics: Posted by nay-seven — 13 Sep 2010, 20:20
]]>
and in it there is no "template" so it explains why i don't find "vst morph" and I tried with asio but i'm sure that it comes from the internal sound card
@gurulogic thank you to try to help me I'm going to see the link you indicate
but find a new fire wire card with texas instruments chip where ?
i'll open a new thread in "general discussion" if it's the right place
but before i'm going to have a look at your link
thank you once again to all of you
have good evening and night too
Ho the one I forgot
congratulation to olivier who programs faster than we can test
In later
Statistics: Posted by waolelaid — 13 Sep 2010, 19:39
]]>
You might also consider purchasing a new firewire card, preferably one that uses a texas instruments chip.
You shouldn't be having these types of audio problems even on a crappy computer.
Feel free to start a new thread if you need any further troubleshooting help . I would be happy to help as much as I can.
Statistics: Posted by gurulogic — 13 Sep 2010, 09:45
]]>
Statistics: Posted by 23fx23 — 13 Sep 2010, 08:42
]]>
about your click and drag problem , are you sure you have install the templates :
Extract the archive and just copy the complete dir named templates by nay-seven in your Usine/files/templates dir.
about your asio problem , it's not easy to help you , have you try asio4all...?
Statistics: Posted by nay-seven — 13 Sep 2010, 08:35
]]>
but if i put on a higher resolution i can't read its too small i've a very bad sight
i've installed the Latest Matrix Pack (1.2) at the same time that 5.25b8
another thing i discovered in morphusine when i click and drag from an inlet of helios (i didn't change the vsti)
i have not in the menu "Vst Morph" as shown in the wiki doku
i'm going to install the latest version but it's always a lot of difficulty because usine doesn't recognise
the Asio and i must always stop the computer even disconnect it
and after one hour reconnect and restart the computer and sometimes it works
I bought a new sound card Presonus Fire Studio Mobile I installed it it works well while 30 minutes
and when i start Usine the sound became very dirt as if i crush stones at 256,512 buffer i didn't go under
I am tired I don't understand the functioning of the internal sound card in W7 (i have no audio in) only the micro
in fact i don't know what to do I'm ready to give up !!!
exuse me
Regards
Statistics: Posted by waolelaid — 13 Sep 2010, 04:52
]]>
Ive templ uploaded a new version where I cleared all the presets exept kept only page 3 for instant demo.
the file droped down from 100megs to 38megs, maybe it will better load for you...
be sure ya have matrix 1.2, and recommand usine beta10 or higher, even thougth it should work on beta8.
/addons/others.
@waleloid: try to increase your screen res, and maybe pressing IB to go in interface builder full screen mode can help ya see more? also can click on yellow circles of usine tracks to reduce them...
hope it helps.. let me know guys how it works...
Statistics: Posted by 23fx23 — 12 Sep 2010, 23:26
]]>
waleloid: It's probably a screen resolution problem, i am in 1380x960 15' screen and nay probably in hi rez too,
so if your screen resolution is lower, i feel it's 1024 or 800, there will be zoom and cliping as you mention.
I can understand it's boring to rescale all items, even if hopefully matrix make it's easier than moving X buttons.
maybe you can try to increase your desktop resolution, are you on max? what's your screen size and resoluriob?
Statistics: Posted by 23fx23 — 12 Sep 2010, 22:54
]]>
]]>
Hi ,i have the same problem but with 3 Gb ram on W7 and another question which is not only for your patch
why with morphusine,synthayan,loopmasher and other i don't remember I can't reach to have it entirely on my screen
even when i open in an empty workspace ? it's very difficult to try to understand the functioning, of a patch when
you can't have it in full sight I only see half of the patches i try to reduce but after I waste things of the paches
I'm on the 5.25b8 why does those pathes are too big and how to reduce them without waste things of the interface
thank for your answer
good night
Statistics: Posted by waolelaid — 12 Sep 2010, 22:42
]]>
]]>
Statistics: Posted by gurulogic — 07 Sep 2010, 08:34
]]>
Statistics: Posted by soundmind — 07 Sep 2010, 04:22
]]>
Anyway there is a pb with the patch i have to fix, database is too big, but not sure how ill
can save datas better way..i think i stored too many datas to pm than make it's heavy.
Ill try to see how to corect that, but i guess it will loodse the presets, anyway, you will
then be able to create yours..i need to find a way to clear or destroy presets maybe. ill try to check that tomorow.
@guru oh yeah, that's explain why i don't found it back
im pretty sure i opened one of your patch that had steps to offset slice and was working not bad ne? maybe we exchanged a test on uploader..anyway no worries..
Statistics: Posted by 23fx23 — 06 Sep 2010, 22:33
]]>
]]>
Statistics: Posted by gurulogic — 06 Sep 2010, 20:47
]]>
checking back my patch it's a bit messy hard wired complex to understand i guess, but don't hesitate if need help.
Statistics: Posted by 23fx23 — 06 Sep 2010, 19:06
]]>