Welcome to %s forums

damstraversaz

that's really great, thanks a lot !

damstraversaz

that's really great, thanks a lot !

damstraversaz

that's really impressive !

damstraversaz

ah super, merci beaucoup !

damstraversaz

Bonjour à tous ! je bloque sur l'attribution d'une signature rythmique pour les sections. D'après le manuel, c'est possible et cela serait dans les settings de la section, sous le tempo. Sauf erreur de ma part, je ne trouve pas ce réglage dans la version 6. C'est fort possible que je passe a travers...

damstraversaz

great !

damstraversaz

Bonjour Sylvain, Merci pour la réponse super rapide, l'important est en effet d'avoir une solution qui fonctionne. Je pense que ce point d'entrées changeantes est a prendre en considération pour les futures versions, de plus en plus de vst utilisent ce système et le vst3 s'impose peu à peu. Si tu as...

damstraversaz

Bonjour à tous, j'ai un certain nombre de plugins, au format vst3 , qui détectent le nombre d'entrées audio afin d'ajuster leur configuration. C'est notamment le cas pour plusieurs vst3 dans le champ spatial ( ambisonic et binaural) Le soucis que je rencontre est qu'actuellement, une fois chargés da...

damstraversaz

ah super , merci beaucoup !
je teste ça dès que possible et vais surtout essayé de comprendre la logique, quelque chose m'échappait

damstraversaz

BOnjour à tous, j'essaie de forcer des notes midi à rester dans le registre d'un instrument, tout en gardant la note ( les DO restent des DO, les Ré des R2 etc). Je n'ai pour l'instant pas trouvé le moyen de faire cela , mis à par passer par un Data mapper value pour remplacer chaque note par une au...

damstraversaz

Bonjour,
idem de mon côté, sous windows. J'ai envoyé un message à l'équipe à ce sujet

damstraversaz

super, merci beaucoup !
je suis passé au travers et chercher un menu comme le remote des éléments de l'interface.

damstraversaz

Bonjour , j'ai une question surement basique, mais je ne trouve pas la solution : comment afficher le Remote Panel ( ou plus précisément ou cliquer ) ? j'ai bien accès au remote de chaque élément mais je ne vois pas ou accéder au panel regroupant tous les midi et key learn. merci d'avance ! Damien

damstraversaz

Bonjour sylvain,
merci !
j'ai pu trouver une solution, le patch ci dessous si cela intéresse quelqu'un :

Bush Rap Usinev5.zip: (3.11 MiB) Downloaded 303 times

damstraversaz

Bonjour à tous, Pour un projet, je cherche à modifier le tempo d'un son en fonction d'un autre ( a priori piste rythmique). L'idée avait été développée par Olivier il y a très longtemps avec une ancienne version d'usine : La vitesse de lecture d'un enregistrement du Bush fils était modifié en temps ...

damstraversaz

that's a really nice project, congratulations.
The possibility to use it offline is really a must have in my opinion. Especially with students ( computers in music conservatory and school are often offline)

damstraversaz

Merci Sylvain, c'est très utile comme info !

damstraversaz

étrange, ça a l'air de fonctionner correctement chez moi ( HH4 et HH3). Peu être la tester avec un autre logiciel pour voir si ça ne vient pas du côté hardware ,ou desinstaller les drivers pour refaire une nouvelle installation ?

damstraversaz

c'est vraiment super, bravo !

damstraversaz

You should take a look too on the IRQ settings of your computer ( system information utility of windows). Some Usb are on the same IRQ , sometime with graphics cards for exemple and it often make issue like. The solution is to find the best usb port of your system.

damstraversaz

that's a really interesting topic, thanks a lot

damstraversaz

Bonjour, je souhaiterai utiliser la suite ambisonic ATk qui fonctionne avec le plugin Reajs de Cockos http://www.ambisonictoolkit.net/documentation/reaper/ https://www.reaper.fm/reaplugs/ Le principe de Reajs consiste à loader des JSFX ( sous forme de fichiers txt) , qui sont compilés par le plugin....

damstraversaz

The last spout beta add the x64 support for spoutcam . This version works for me with HH4 for information ( max 30 fps, in the settings on my test computer). any news about the native spout feature for usine ? It could be great to have a spout output from usine to others softwares. A small suggestio...

damstraversaz

Same here, I was always on tour and now in holidays...I really want to try it asap and help the team if possible

damstraversaz

You are making some very useful ( and simple...il really like that) addons, thanks a lot !

damstraversaz

great ! that's very useful, thank you

damstraversaz

thanks Nay !

damstraversaz

I did not receive the link ( not in spam folder too)

damstraversaz

I'm still using vst 32 too with HH3. There is some great old vst, and I never use the advantage of x64 for usine. It make sense for me with kontakt for exemple with a DAW for composing. But I'm using usine for live so projects are lighter. A native bridger like reaper is in my opinion the perfect so...

damstraversaz

great news!

damstraversaz

great news !

damstraversaz

Hi, Is there any future plan for sharing video option like Spout ? it will be very useful to send video out to resolume, touchdesigner or HeavyM for exemple. Same for Spout Input , there is so much to do with video input in Usine ! For Input, Spoutcam actually works but only for the x32 version of U...

damstraversaz

nay-seven wrote:You can also simply drag the same module over the existing one, will turn to red, then ask you the channel number you need.Then you'll only need to recreate the missing inputs/outputs .

oh, that's a very nice tips !

damstraversaz

thanks , I will try it as soon as possible!

damstraversaz

great! thanks a lot for the feedback.

damstraversaz

It could be useful !

damstraversaz

great! thanks a lot for sharing. Btw, nice video !

damstraversaz

I'm agree, the more useful function could be to have all of this for each sample, and not for each key, as actually there is one sampler per key with pitch, volume, start end control. But I think it will be a new rebuilt. There is actually some workaround for this , with multiple midi sampler, using...

damstraversaz

thanks for the fedback, it seems that I need to take some time with the midi sampler. In any case, I'm believe this is one of the most important module for usine and I love to see it evolve too.

damstraversaz

yes, this is possible. I was not clear, sorry, I was thinking about more options per sample. There is actually some limitations : for exemple ,if I remember, the random mode works fine for short sounds for exemple. But you can't choose a start and end point for each sound. So all sounds must be edit...

damstraversaz

I'm agree. There is a lot of external vst sampler on the market , but having a internal sampler with usine is often useful. I'm missing too more controls for each file ( volume ADSR for exemple), a round robin option... of course that's just suggestions to the team.

damstraversaz

thanks a lot !

damstraversaz

Yes , it could be very useful.

damstraversaz

Wow, that's a fast update ! thanks a lot !

damstraversaz

You're right Olivier. But it can give Usine a real compatibility for all the projects during years. For exemple, I'm now using most of time the 64 bit version of usine, but all my previous projects are with the 32 bits. I often need to use a rack or a patch from another project, But without 32/64 bi...

damstraversaz

that's some very interesting modes, I'm sure I will use it a lot.

damstraversaz

great !

damstraversaz

I'm agree, a spout input and output could be very useful. Actually, I'm using spoutcam as input, but it seems to need more ressources, and closing the project often crash usine ( HH3)

damstraversaz

thanks a lot for this, that's will be very useful !

damstraversaz

I'm agree , I really like these feature before ( usine 5), for dealing with projects.

damstraversaz

yes, but the sound card input are directly send to the output, that's could be an issue. The pro version allow you to use the asio insert driver inside usine, but you must change the routing inside voicemeeter, and it's not easy to do. About the ressource, voicemeeter take a lot more cpu than, asio ...

damstraversaz

really impressive, congratulations !

damstraversaz

nice !

damstraversaz

Asiolinpro is a great app, It really helps , I'm glad you find it useful. Ariajazz,I'm not sure about your idea. Maybe I'm wrong , but rewire is first made for "linking" several DAW ( in my opinion asiolink do this better , and is a lot more powerful) and not for using two asio driver for 2 differen...

damstraversaz

first sorry for my poor english I'm going to try too the esi in the next month, for small digital art installations. about asio --> MME or WDM it will be latency, depending of you system , generally less than 30 ms. It could be or not an issue , depending of your use of this. For sending sound from ...

damstraversaz

very useful, thanks a lot !

damstraversaz

oh great ! I will try it as soon as possible, thanks a lot !

damstraversaz

Hi Christoph Guillermet , the creator of Whitecat ( white cat ) just add a very nice module for his software, especially useful for using one controller ( acceleration, tilt etc) I just found this is a amazing idea, and a very natural approch to data ( audio, midi) et dmx. It could be a very interes...

damstraversaz

de rien ! c'est typiquement le genre de truc très énervant ( et vraiment ennuyeux à partir du moment ou on fait de la scène)

damstraversaz

When John, the creator of asiolink will release the new version, I will make a wiki post on this. the general idea: you can share an asio driver between several software: routing the hardware input (ASIO DRIVER IN) to the asio input of each software ( ASIO HOST IN MIX) , and with the loop fonction, ...

damstraversaz

another option is to use an Asio router ( If I understand your issue) . I'm using this one since years , and I found it very good and stable http://odeus-audio.com.au/Odeus/ASIOLinkPro. In the next version ( actually in RC) there will be an option for looping audio ( for exemple audio out from a DAW...

damstraversaz

Easine was ( and is always, it dependsof your needs) very useful for small installations , or low ressources computers.It was useful too for exporting VST, as you don't in most case use all the features off the full usine version. I admit I really like to see in a near future a vst version of usine....

damstraversaz

Cela m'est aussi arrivé ponctuellement sous windows 7 mais pas sous windows 10 depuis la mise a jour. J'avais ceci pour le résoudre: dans le panneau de configuration nvidia: paramètres 3D--->gérer les paramètres 3D--->>>paramètres de programme. Il faut alors ajouter une configuration pour usine et c...

damstraversaz

Interesting !

damstraversaz

great idea, and a very nice software, congratulations !

damstraversaz

Salut,
en effet , c'est très intéressant, le soucis est plutôt les gros problèmes de disponibilités avec les dates..je vais regarder ça , merci !

damstraversaz

bonjour a tous, un topic juste pour remercier toute l'équipe de sensomusic pour leur travail, c'est vraiment un logiciel fabuleux qui permet de créer ses projets artistiques en court-circuitant toutes les contraintes que d'autres softs imposent, et surtout de créer des choses impossibles pour la plu...

damstraversaz

a priori j'ai trouvé la solution: dans la même piste, certains patchs envoient leur donnée midi vers un autre patch avec un sampleur par l'utilisation de bus midi. déplacer la source sonore ( dans ce cas le patch sampleur ) dans une autre piste résout le problème, plus de coupures de son ! c'est peu...

damstraversaz

je vais faire des essais cette semaine avec des patchs plus simples, et et en piste par piste. au pire je pourrai adapter le patch pour que tout soit en mode rack, mais ce n'est pas super pratique.. et adapter tous ces patchs avec Hollyhock me demanderai trop de temps en ce moment. je te tiens au co...

damstraversaz

Bonjour a tous, je viens d'installer usine 5 sur un nouvel ordinateur, et j'ai un soucis de coupure de son . Ce sons des projets assez complexes, et je ne les ai pas adapté pour l'instant à Hollyhock, les spectacles les utilisant fonctionnant correctement avec la version 5. j'utilise la toute dernèr...

damstraversaz

oui, ce sont vraiment des modules dont je comprend l'utilité maintenant, et qui ne me "parlaient " pas vraiment d'après la description du manuel. j'ai beaucoup avancé sur ce coup, merci !

damstraversaz

Salut , tout d'abord un grand merci, ça fonctionne parfaitement. j'ai juste remplacé l'OSC lister et enveloppe follower par un sous patch permettant e fonctionner directement en midi ( par rapport à mon capteur). En tout cas, c'est fort utile d'avoir cette possibilité d'utiliser l'osc pour cela, sup...

damstraversaz

a priori c'est tout a fait cela, super ! pourrai -tu m'aider pour relier ce patch aux module create midi message ? ( par exemple mouvement donne trig on puis cc1 valuer 127 , arrêt du mouvement donne trig off puis cc1 valeur 0 ) je n'ai jamais utiliser les modules led, switch etc pour créer des mess...

damstraversaz

Bonjour ,
merci bien pour la réponse ! en effet, c'est tout a fait l'idée. Pour le patch, je teste ça dès que possible et te fais mes retour au plus vite !
encore merci
Damien

damstraversaz

bonjour, je cherche à créer un patch pour des enfants avec usine 5.8 ( Hollyhock est trop récent pour le vieux pc que l'on a) , et j'aurai besoin de conseils avisés, car je bloque totalement... j'utilise un capteur de mouvement -accéleromètre: basiquement il envoie un message cc pour chaque axe ( pa...

damstraversaz

great !

damstraversaz

seems to be very interesting ! I hope you will have native midi control, althought it could work with the Hid module.

damstraversaz

nice one !

damstraversaz

that's really useful, thanks a lot for sharing it !

damstraversaz

solution interessante ! merci nay-seven je suis convaincu qu'usine a un fort potentiel pour les interactions par capture vidéo, et ( je l'ai ecris dans un post pour la nouvelle version) j'espère vraiment que cela va pouvoir etre développer ( possibilité de déplacer les zones, les redimensionner, cho...

damstraversaz

thanks to all, that's some really interesting patchs, I learn a lot !
here is a very litle version with just one note output, but you can send a note off message below the cc treshold instead using a fixed lenght.

cc to note converter onoff

damstraversaz

Hi I'm actually trying to create a cc to note patch. the main idea is to create a note on when the cc message is up to a certain value et to create a note off when the cc value is below the choosen value. I suppose that's not a really hard task, but I must admit I did not find a good solution for th...

damstraversaz

oh, impressive !

damstraversaz

Thaks a lot for sharing, it could be very useful.

Damien

damstraversaz

c'est vraiment impressionnant !
j'avoue ne jamais avoir imaginé ceci possible, en tout cas ça me parle vraiment musicalement. félicitations !
bien entendu , si tu souhaites le partager, j'en serai plus que ravi

Damien

damstraversaz

en effet, c'est fort utile . la relation dynamique sonore vélocité marche parfaitement.
merci !

damstraversaz

Bonjour a tous, je suis actuellement en train de construire un patch a partir du peak follower with treshold. j'essaie de rajouter une détection (ici par les db ), pour pouvoir modifier la vélocité de notes midi. Ça fonctionne plutôt correctement : j’utilise le gain de l'enveloppe follower pour régl...

damstraversaz

I have this one. the quaility is very high, and you will have a expression pedal input.

umi3

damstraversaz

thanks !

damstraversaz

first thanks a lot for sharing.
I have an issue with the dec2bin module, which is not find by usine in the modules folder. does it need a additionnal pack ?
best,
Damien

damstraversaz

seems to be a nice tool ! I will surely bought one, the possibility to have sdk could be great

damstraversaz

that's very interesting. what are you using for visual tracking ?

damstraversaz

oh, nice !
I will be very interested by the patch.

Damien

damstraversaz

another suggestion about samples and v6: maybe I'm missing something, but I can't drag and drop samples ( wav) from the browser ( navigateur) to a vsti gui ( like shortcircuit for exemple ) although it works from the windows explorer. it will be very useful ( like the browser of ableton live , studi...

damstraversaz

super !

damstraversaz

c'est parfait, exactement ce que je cherchais. un grand merci !
Damien

damstraversaz

bonjour a tous, j'utilise actuellement avec mes élèves des systèmes de lancement de son sur divers surfaces. le beat follower avec threshold convient parfaitement dans la plupart des cas, mais j'utilise aussi dsp trigger pour prendre en compte la vélocité des frappes. dsp trigger . sur des surfaces ...

damstraversaz

Super, merci pour la réponse . certaines marques sont elles a éviter ( entre les grands généralistes comme Acer, HP, asus, packard bell etc) ? je crois me rapeller avoir lu des commentaires très négatif sur hp dans ce forum.

damstraversaz

bonjour a tous, je vais réaliser une installation sonore d'ici peu, et pour des raison de place, souhaiterait utiliser easine sur un netbook pour ceci. les besoin en ressources processeur ne seraient pas énormes, de même pour la mémoire. au niveau de la latence, pas besoin non plus de buffer à 128, ...

damstraversaz

Hi
any news on the kinect add ?
best,
damien

damstraversaz

great ! I will try it as soon as possible . thanks a lot for sharing !

damstraversaz · it seems that the version is 5.50.51 and not 5.50.52 on the download section.

it seems that the version is 5.50.51 and not 5.50.52 on the download section.

damstraversaz

hi first I wish to all an happy new year ! I'm actually working with dancers , and the video of the wiimote with usine give me some ideas for the dancer, who could manipulate the sound on stage with the wiimote. As I'm totally a newvie with this, I will need some advices: 1 do you needto be in front...

damstraversaz

Olivier, What the main advantages of the kinect for usine ? I saw some video for gaming, and understand the use of the camera , but I'm note sure to understand the use for audio. for exemple, there is some video for using kinct with midi kinect midi youtube video I don't saw the interest of a kinect...

damstraversaz

[q]To get more accuracy, I think a few options could help : - having RGB output, which could help : * to track motion not only on contrast (like that http://www.youtube.com/v/BWf_sy87qNI) * to get on/off signals (to use motion gesture) - implementing some options in motion detection mode to reduce n...

damstraversaz

I will try it too for usb card, and windows XP. for knowing usb IRQ used by your soundcard: sorry I don't know the english translation 1 propriété systeme, onglet materiel 2 gestionnaire de peripherique , then select "controleur de bus usb" 3 by cliking on each controller and chose "properties" and ...

damstraversaz

Hi nay first thanks for the answer. I try today your solution, but it does not work for me , the same happends, but not always: sometimes there is no double midi note, sometimes there is. it depends maybe ( but I'm not really sure) of the timing of the key or midi press. If you press it on the last ...

damstraversaz

Hi I'm actually creating some patterns with the piano roll for a drum sampler. each pattern is on 1 midi file from a piano roll.the sync is fine if I use the preset manager from each patch ( midi leain or key learn with quantize on cycle for exemple). but when I use the conductor for storing it ( cy...

damstraversaz

it does not work very well for me too, so for now , I avoid kontakt for usine set ( for live)

damstraversaz

it works perfectly thanks a lot !

damstraversaz

Hi everybody first sorry for my poor english... I begin to use usine for midi and have a small question about cc curve from the piano roll. I try to make a cc curve for the filter of helios , like a automation enveloppe ( ableton live, reaper, cubase etc...) http://zepload.com/images/1282121069_pian...

damstraversaz

thanks for the answer, and for the suggestion, that's a nice idea !
i will try it

damstraversaz

Hi nay, I'm the other guy from kvr who ask the possibility to control more pattern with midi note. I have usine too, and will be ore than happy to have a patch like monome for sending midi notes, as you say you are working on. I did not see the patch in the addon section, maybe i miss it? I must adm...

damstraversaz

that's could be very useful. actually, I load each fx on reaper before using it for stage. reaper have a very nive latency report.

damstraversaz

in my opinion, for gold member. If i can access to all addons, and all the usine features for free, I will not need to buy the full license ( i don't edit scripts yet ). that's a good reason to pay the software for me. actually it's like having usine free for 90% of users.

damstraversaz

i really like it too.a very good way of thinking.

damstraversaz

thanks a lot !
your second answer is interesting, I did'nt think this feature take a lot of cpu, so you're right, it's not a good feature for live use

damien

damstraversaz

hi maybe I miss this feature but I don't find this could it be possible than each workspace memorizes the size of the usine windows ? i use usine with some other software on the same screen, so it could be useful to have the possibilitie to keep the size of the main windows with each workspace. anot...

damstraversaz

nice idea !

damstraversaz

if you're going for use with xp, there is a very nice offer from dell for a 14'( before Wednesday. ( the second with Processeur Intel® Core™ 2 Duo T7250 (2 GHz, FSB 800 MHz, 2 Mo de cache L2) with TVA it's less than 600 euros and you can still choose XP ( most of laptop are now with vista) I bought ...

damstraversaz

I suppose we need to install xp on the asus eee pc ( correct me if I'm wrong but the pc works under a linux system) ?

damstraversaz

in my opinion, the lite. most usable for a sequencer , and for a modular host like energy xt and bidule for exemple.I would say a heavy one before the new rack feature.

damstraversaz

just thinking about this: vst version could be only for gold members. I thinks it's a good reason ( with the access to the addon's section) to buy usine .
I don't remember someone spoke about that ,what do you think ?
btw, steinberg release vst3 sdk kit this week

http://www.steinberg.net/24_1.html

damstraversaz

very interesting
thanks

damstraversaz

funny, are you thinking to create an "usine OEM" version ?
seriously, vst with the new rack feature will be perfect !

damstraversaz

you're making an incredible work, olivier. congratulations, really.

damstraversaz

very funny !
merry chrismas too

damstraversaz

ouah ! that's a very good news ! will it work with midi too ?

damstraversaz

first sorry for my very bad english, I hope you will understand what I mean... I'm not totally agree with you, olivier about the doublebass. of course you spent days and years practicing , like i do for piano ( it's my job like you) but in fact you are not alone . you work with a lot of people who h...

damstraversaz

donationware could be an alternative for gold users, just an idea ...

damstraversaz

any news about the vst version ?

damstraversaz

a fantastic sampler, sc1 is very good too

damstraversaz

thanks !

damstraversaz

olivier, check your mail, hope it helps...
a picture authentification module on the register page could help too but a lot of robots can pass this protection actually.

damstraversaz

actually we have the same problem with the forum of one of my group. a friend is actually working on it and if he find a solution i will send to you.

damstraversaz

I'm super-excited, whichever way you decide to go, Olivier. me too ! the "little" vst seems to be very interesting. Usine is a complex software and if I need all the possibiliy of the soft, so I will use the host. but if i need one or two patch ( as fx for exemple) I will need the vst. maybe the si...

damstraversaz

I'm totally agree with this solution

damstraversaz

thanks !

damstraversaz

Hello, @damstraversaz: I suppose you mean the "groove box" thing when you ask for an add-on? I could upload it tonight if you want. . yes exactly . It seems to be very nice, and It could help me to advance and with usine. I always learn a lot with your add'ons ( like your fantastic Punch In Pack ) ...

damstraversaz

It could be a good idea. in my opinion, it depends on the organization of the add-ons. actually I just found add'ons are not really organised, and maybe it could be some more add'ons ( from basic to complexe)and organise with category. for exemple : spacial/ delay destruction loop/sampler tools midi...

damstraversaz

very nice
is it possible to download this add-ons ?

damstraversaz

I forget this...thanks !

damstraversaz

I 'm trying to use this patch but there no module inside... I would like to use it for increment/decrement tempo value . in my opinion it will be easier to use this in global tempo synchronisation with button "+" and "-" near X2 and /2 . the mouse is not really instinctive for me and and obliges to ...

damstraversaz

ouah....
very nice patchs.
thanks a lot !

damstraversaz

in my opinion, the vst version should be the priority. and for bussiness plan too, I thinks that a lot of musicien don't want to change their preferred host but would like to use the power of usine inside

damstraversaz

vst version could be very useful. for exemple I use a lot energyXT with usine for the sequencer of xt and for the very good sampler of xt.if I could use usine as a vst and energy as an host... for developement, it could be interesting : no need to developpe a sequencer for usine and for business pla...

damstraversaz

very good news !

damstraversaz

thanks a lot,I never succeeded to synchronize my xiosynth with usine tempo. You made my day ...thanks !!!!!

damstraversaz

here is a new limiter, from TbT. sound very good to my ears, and from the read me file " plugin Latency: 0 samples supported samplerates: 44.1khz - 192khz"

http://www.tinbrooketales.com/archive/f ... A_v1-1.zip

damstraversaz

works for me for a drink or more and of course for the concert

damstraversaz

I was working with usine this morning , and just want to thanks you , olivier for this software. I'm using since a long time music software and I never imagine it could be possible to make music like this. a real instrument, able to play with human in real time. again, thanks i will see you in lyon ...

damstraversaz

that's very clear, thanks a lot

damstraversaz

you are right !

just another little question, not sure to understand what could be connected to "device" in the midi out module ( I supose it's must be something connected for synchronizing) sorry , I just begin with usine...
btw, I'm very happy to hear you tonight olivier

damstraversaz

I understand how it works now
thanks a lot

damstraversaz

first, sorry for my very bad english... I have a xiosynth, from novation.I use it as an audio interface ( asio driver) and as a midi controller . It 's too a synth ( kstation engine) and I 'm trying to synchronize it with usine without success. It's works perfectly with ableton live, without changin...

damstraversaz

it works perfectly now , thanks !

damstraversaz

hi everybody
I'm a new gold user of usine. like nay seven , I can't download the add-ons.
I'm missing something?
btw, what a wonderful musical tools !

Welcome to %s forums

Search found 157 matches

Re: Enhanced Player audio with template

Re: Rhythm Box beta release

Re: FletcherMachine Version 2

Re: attribuer une signature rythmique à une section

attribuer une signature rythmique à une section

Re: Ableton Link

Re: detection du nombre d'entrées audio pour les VST3

detection du nombre d'entrées audio pour les VST3

Re: forcer des notes midi dans une octave précise

forcer des notes midi dans une octave précise

Re: problème avec Kontakt 7?

Re: Remote panel

Remote panel

Re: ancien projet Buggy Bush

ancien projet Buggy Bush

Re: Motionkit

Re: Panner Surround simple + OSC + preset

Re: ENTTEC DMX USB PRO

Re: Chaine Youtube de tutoriels

Re: windows 10 and audio interfaces

Re: Tracks order and threads

Modifier le nombre d'entrées/sorties audio d'un vst

Re: Spout output

Login • Register