Welcome to %s forums

ethnix73

It would be really usefull to have a way to control item options in the grid. Every one have is own workflow with hollyhock but it would be great to be able to bypass a rack even if the active option is selected within the grid item option. A workaround is to bypass a patch even is the rack have the...

ethnix73

Great!

Thanks

ethnix73

ethnix73

Show/Hide a rack: Click on the led in the upper right of your rack

Show/Hide preset manager: Click on the camera icon just beside the rack led

ethnix73

@fractalist: you can find this add-on in the "other" section by selecting "5.* and before" with the compatibility filter.
This add-on is not usefull now with Hollyhock possibility and the grid. But have a look if you want...

ethnix73

I've tested this patch with audio input for live sampling.
Three parameters added max rec time, clear rec and rec mode

see first post

ethnix73

I have uploaded a new version with minor improvement in the pitch management

See first post for download

@niggles : i have uploaded a version without the wav files

ethnix73

I will wait before uploading it as an add-on because it's really experimental, and not really finished....

Hi nay! don't hesitate to make comments

ethnix73

Il n'y a pas eu de changement avec hollyhock concernant les templates, je crois
wiki templates

Les templates sont dans le dossier /templates

ethnix73

I've add another patch this evening. Side is based on the freeze function of the reverb module Center is based on automatic sampling in circular buffer mode and the freeze function of the reverb mode Sub is based on the freeze function also but in mono Pretty experimental but fun to make. See first ...

ethnix73

Been a long time since i uploaded a patch :-) I'm building patches with one main idea: generate random ambient pads... Here is my experiment of this afternoon. It is based on the freeze function of the reverb module. Freezoscope Freezoscope Without the wav files http://www.sensomusic.com/forums/uplo...

ethnix73

Great project woodslanding. Can you give us some technical specification?

ethnix73

Devices and rack, automation record, synthetic view, pan and zoom, new binds system, add midi device dynamically, recreate option,automatic inlet creation, sequencer as a module, etc...

impatient to have a good hollyhockday

ethnix73

It might be...
Check sensomusic youtube channel perhaps for new features

ethnix73

It's ok here but sometimes you need to reload the pages...

ethnix73

french wiki page done...

ethnix73

il faudrait qu'à chaque changement de note (peak follower partial tracker midi2audio ???) mon signal soit routé vers
un système de sampler ou de delay

Ah oui, j'avais compris que tu voulais simuler une pédale de sustain que sur une note!

ethnix73

si tu prends une pédale de sustain que tu plugs directement dans une entrée audio et que tu mets un module peak follower, tu devrais pouvoir déclencher un sampler pré-configuré, non?

ethnix73

hello skei and nay-seven. Happy to know this patch have yet some interest. Unfortunatly, i've not been able to resolve some bugs in this patch, and i could not work more on it because i haven't got anymore a launchpad :( Anyway, thanks for keeping a copy and sharing it nay-seven! If you have questio...

ethnix73

happy new year to everyone!

ethnix73

J'ai acheté cet écran tactile d'occasion à un pote, et ça fonctionne bien.

La latence de 8ms n'est pas plus génante que ça...

ethnix73

Thanks caco!

ethnix73

"Ma première question est : d'après vous est il possible que la quantization du découpage se fasse en fonction de la longueur de ma deuxième boucle (je pensais à la place d'avoir un nombre fixe comme 4 utiliser une variable = l1/l2 ("l" étant la longueur de mes rec)." Je comprends pas vraiment ce q...

ethnix73

Oui, c'est bizarre que ça ne grésille pas à chaque fois. Pour un patch looper dédié au launchpad, j'avais un problème qui se rapprochait: J'avais des craquements à la fin de la boucle et ceci était du au bouclage qui ne se faisait pas sur un point 0 de la forme d'onde. Pour résoudre ça, j'avais mis ...

ethnix73

Thanks caco for the last version

ethnix73

I've translated in french the first page in the wiki. In fact, i had just to put the links as all the pages were already translated

I've also started to translate the additional packs in french.

ethnix73

Xnview pour ma part

ethnix73

Oui, c'est vrai pour le midi get message jeanrene...

Je l'ai laissé par étourderie!

ethnix73

Apparement, c'est un message de pitch bend que tu reçois sur le canal 5: [256] IN:0105BA1D:224-61-64-PB [Chan=5] C'est toujours le même bouton de ton pédalier qui semble déconner? Si oui, dès que tu reçois soit un message de pitch bend, soit un message sur le canal 5, soit un message system reset, t...

ethnix73

I will have a look for the french translation

ethnix73

I've translated in french the Matrix pack and the Matrix (display and set) wiki pages (and links). While doing this, i've corrected a little error in the french wiki wich prevented from seing correctly the "Common parameter" chapter in the matrix wiki pages... But strangely, i have to refresh the pa...

ethnix73

J'ai déjà essayé de faire un détecteur de tempo et c'est vraiment pas simple. Si tu essayes de détecter le tempo sur la caisse claire, tu ne pourras pas avoir de signatures asymétriques. De plus, dès qu'il y a un roulement de caisse claire, ton détecteur va s'affoler. A la limite tu peux détecter ca...

ethnix73

ok nay-seven, i've started to translate the tips in french.....

ethnix73

I've done the french translation for conductor and sub-patches chapters. So the main parts of the uSine manual are in french now... I don't know if we need to translate the chapters concerning script, templates and IML because you've got to understand english to use them. What do you think about thi...

ethnix73

Yet to be done in french:
sub_patch
conductors

ethnix73

I've done a few translations in the french manual this morning...

Yet to be done:
midi_learn_and_key_learn
wave_player
browser
sub_patch
touch_screen

ethnix73

Je dois avoir quelques patchs de coté sur les relations entre pitch, tempo; longueur......je jette un œil dans les jours prochains et vous redis ça... J'avais fait un petit add-on, il y a pas mal de temps ( http://www.sensomusic.com/forums/viewtopic.php?id=1174 ) et il me semble aussi que le sujet a...

ethnix73

Hi guys, after nearly two months away, i will be back in a few days, and will give some help for the translations in french....

ethnix73

Il y a ça de noter sur le site de Livid concernant monomebridge:

“MIDI thru” will pass the block or Ohm’s MIDI messages to another MIDI port, so it can be used in other apps or devices.

ethnix73

yes 23fx23, you're right with the "round" module!

Giving an idea without testing really it is not the best way

ethnix73

Or like this also:

With switch:
OFF=0
ON=127

ethnix73

The bass player from one of my band have started to make a tutorial for maschine in french.

Some of could be interested, so here is a the link :

http://www.youtube.com/user/MaschineTuto#p/u

ethnix73

oups, long time ago : ethnix73 wrote: I don't know if it's script or matrix module related, but the exclu mode is not compatible with a preset manager martignasse.... yep, i know, the problem is at script level. as it is based on the last clicked cell, it's not working very well with the data provi...

ethnix73

Another article on CDM!

ethnix73

Thanks olivier,

[conductor/preset] some time you're obliged to press the recall button twice

Cool, i thought it was a problem coming from my patch

ethnix73

There is the IML command "RENAME_PATCH newfilename"...

Try it gthibert but i don't remember if it can change live the patch caption.

ethnix73

I've uploaded a new version but only for the launchpad. It should the last one before adding this patch to the addon section. A few improvments: -Pan parameter -Start and end position per sampler wich allows to slice only a part of a sample. -A filter per sampler -Two different mode for the pitch: R...

ethnix73

I'm afraid there isn't another solution thomas...

You've got to upload a file in order to create an addon.

That's why i've put a direct link in the addon description.

ethnix73

Cool addon moody33!

It Reminds me a G2 module ^_^

ethnix73

The script is ok for my need, bsork.

Thanks anyway.

ethnix73

Thanks nay-seven,

But, yes, i would like to see the 4 distinct ones. Perhaps, it's not possible...

ethnix73

Ok, i have put a direct link in he addon description.

ethnix73

yes, i can make a direct link....let me know.

ethnix73

A screenshot from the matrix version (i'm not yet sure of the layout...)

ethnix73

Hi soundmind, Here is a new version. Some little changes to do yet certainly, but the release should be near now. You will find in the zip file: - A launchpad version - A matrix only version - A Ohm64 version (but with still a few bugs) - Some documentation ( patch explanation and how to configure a...

ethnix73

A simple question:

Is there anyway to concatenate bitmaps?

For example, four wavdisplay wich would be in the matrix module using the bitmap in inlet.....

ethnix73

I've uploaded the addom AoN random by Thomas Thomas Helzle in the addon section. Here is a quick presentation: AoN Random is an add-on to create pseudo-random sequences of control events with a lot of control over the result. It is based on fractal noise algorithms inspired by some shaders for 3D-gr...

ethnix73

Yes, thanks master bsork! I tried delete but i have yet big difficulties with script syntax.... So, here is the good script for "Remove commatext elt": ///////////////////////////////////////////// // Remove Comma text element //////////////////////////////////////////// // parameters declaration va...

ethnix73

Oups, the script: ///////////////////////////////////////////// // Get Comma text element //////////////////////////////////////////// // parameters declaration var input : Tparameter; var nth : Tparameter; var output : Tparameter; var sl1 : TStringList; // destroy procedure Destroy; begin sl1.free;...

ethnix73

I'm trying to modify the get commatext element script, to obtain the inverse result: remove an element from commatext. I just want to get an element from a commatext, and remove it. The goal is to get the commatext from a list box, and being able to remove the selected element from the list..... Any...

ethnix73

Do you really need the num outlet nay-seven?

If no, try something like this perhaps:

ethnix73

It's the better solution 23fx23....

a less elegant solution would be:

ethnix73

Oups,

Don't forget to reset the midi learn on the play buttons.....before making yours....

ethnix73

I've uploaded a new version as a workspace. This one is only for use with a launchpad or a midi controller with the same midi settings as a launchpad. The main control panel have changed and looks like now: http://sensomusic.com/forums/uploads.php?file=Uslice%20Control%20panel.jpg You can download i...

ethnix73

It should work. I've just tested it and it's ok....

If the name of your preset manager is "pm", the message will be for example:
SET_STRING_VALUE pm 4 "yo!"

ethnix73

Oups, ok soundmind... i nearly never download from my web site. i will upload it to the forum servers, as i've got a new version....no, two new versions: one for the launchpad, a one only with matrix cells. By the way, in the version you've downloaded, there is always the bug with drag&drop, it's re...

ethnix73

Thanks moody!

ethnix73

you should write:

SET_VALUE MyMidiCreate "msg type" 3

And here, i'm sure...no hardware problem

ethnix73

so, As indicated in the manual, sysex dumps are splitted in different blocks. Each blocks have the same structure (F0, 33, 7F , 0A, 20...F7). Have a look at the outlet receive from the midi in module, and you will clearly see this blocks. I tried to stock this different blocks in different arrays. I...

ethnix73

Ok, good idea to store data in a workspace... I had a quick look. Apparently sysex received from the g2 with a dump one seems perhaps to have only patch data...Don't know if it have block id msb and block id lsb .... At first, i believe you should have perhaps to concatenate with another array F0, 3...

ethnix73

Hi moody33, yes, i'm still a g2 owner. I will keep it forever (unless a g3 :) )... I will try to test your patch today. Why do you want to store and send sysex? To load external patches? One year ago i believe, I made a patch whith program changes to load patches from the G2 memory. I had a few diff...

ethnix73

Marvelous addon to Usine!

So many more possibilities caco!

Thanks in advance

ethnix73

Hi kenan,

you can't do it because it disturbs the sound.

Could you be more precise?

After a quick test, i don't hear any change here....

ethnix73

whoaouhhhh!

ethnix73

I've updated the link on the first post. A few bugs resolved: -Drag&Drop was not implemented in sampler A and B (:rolleyes:) -Changing a preset in the PM could could lead to repeat the same cell/pad avoer and over. -Changing the played file in the option window was not reflected on the matrix/launch...

ethnix73

I will try to improve a little this patch before uploading as an addon. It's really simple. I use only a few midi create and event control modules: When (mouse down), a midi note on is created. Then moving the finger just control pitch bend. And releasing the mouse, a midi note off is created reset ...

ethnix73

I made a little experimentation tonight with my new touchscreen :D Only bi-points but it's really fun. So, with a really simple patch, i just try to emulate a kind of theremin: A little video here http://sensomusic.com/forums/uploads.php?file=touchscreen%20theremin.jpg By adding a gain parameter con...

ethnix73

Nice example!

Funny because i made a little experimentation this evening for a patch with a touchscreen ( i got one recently)....and discovered this patch in the library by having a look to the multitouch folder.

ethnix73

Welcome captain mission!

ethnix73

Really interesting caco!

Could it be some kind of mid/side comp-filtering?

ethnix73

@soundmind:
thanks. Don't hesitate to post your comments (+ or -) when you can test it.

@zoukopomme:
If we manage your ohm64 to work correctly, this patch will be really easily adaptable to it.

ethnix73

Something like this perhaps tpresto:

ethnix73

Oups, thanks nay-seven...I'm not yet up tp date

ethnix73

Sampler is not done to play multiple files at once.

Polyphony settings is usefull in midi in mode for playing chords for example....

ethnix73

maybe time to upgrade the other one..

Don't know nay-seven

It was just to know if it was not too cpu heavy on older configuration...

ethnix73

I've updated the link on the first message: -You can choose file within the matrix now -Implemented temporary loop within launchpad (press two pad at the same time without releasing them to set the loop, and press only one pad to stop temporary loop), but is not implemented with the matrix cells -bu...

ethnix73

slow 80ms

With a core2dou 8400, asio buffer at 128:
Easine with refresh speed at 25ms = 5% to 7%
Usine stand alone with refresh speed at 50ms 5%to 7%

So I will make two final versions....

ethnix73

i'm around 15/20% on a dual core amd, with asio buffer 128 It's quite high. Wich refresh speed setting have you? as i don't have any launchpad, i 'll certainly adapt this to my need ( with special copyright of course No problem nay-seven. The main dilemna with this patch is too combine function for...

ethnix73

I added also the possiblity to create a "temporary loop" by pressing two pads without releasing them (as in mlr), but it's not yet implemeted for the matrix cells. maybe not easy cause the matrix is'nt multitouch..?( or use the new poly feature ?) I did not had this in mind....I will have to think ...

ethnix73

Nay-seven wrote: i can't change samples with the last 4 row , only with midi note, could be cool to edit it via the matrix..? ethnix73 wrote: In this version, choosing files is only implemeted with pads, not with matrix cells. :)....Will be in the tomorrow version nay-seven wrote: what is the cell w...

ethnix73

Yes, nay-seven, test it deeply. That's why i created this thread. I spended a few months studying more deeply Usine arrays, matrix module, and monome application ( perhaps later, i will try to make a patch inspired by presscafe from stretta...). Ask for more information if you need, because i have j...

ethnix73

I tried to export the workspace but it didn't work in my case

Strange...Just tested it in Easine, and it seems ok.

Audio files are saved in a folder named audio where you've exported your patch

ethnix73

it's because the play and stop button works only when synchro of the sampler = play button If you are in this mode, you should disconnect the wire from the outlet start pos of the wav display module linked to the inlet pos of the sampler . To do a pause function within the play button mode, you cou...

ethnix73

Before uploading this patch as an addons, i would like to have some feedback about bugs, suggestions.... http://sensomusic.com/forums/uploads.php?file=Uslice%20All.jpg It's a kind of mix between molar and mlr. You can use it with or without a launchpad. The 4 last rows allow you to change wich sampl...

ethnix73

Submitted also on CDM

ethnix73

Submitted on rekkerd.

And yet on audiofanzine by nay-seven

ethnix73

Have a look at the physical modeling addons perhaps:

http://sensomusic.com/addons/index.php? ... ,0,1,0,#10

ethnix73

A few times ago, i made a littlle add-on to convert lenght and pitch to tempo.
You can find it in the add-on section synchro,time named Pitch shifting , lenght and BPM conversion

Use it with the tempo to delay Usine subpatch you will find in Modules/Synchro&Time...

It should do the trick.

ethnix73

Hi bsork,

"You only need to use Process whenever there is something you want to be done within a block without any callbacks",

Thanks for this precision!

Digging so slowly in script

....

ethnix73

I've done a little script to adapt the speed of the grain sampler sampler according to the global tempo, the lenght of the sample and his number of beats. I use it to slice the sample and re-order them. I'm wondering if my script is buggy or not. Do i really need to put everything in the callback pr...

ethnix73

Perhaps:

1) you've got the option "perfect synchro" in global setup/asio

2)The precision of your fader is not set to integer. Unless your fader is set to integer, the precision will always be float...Other precison modes than integer are only visual feedback..

ethnix73

Also here:
Rekkerd

ethnix73

Nay-seven on Create Digital Music

ethnix73

Thanks to share thomas!

Great tool for randomness.

And you've nearly done all the description for the wiki...Tell me when it should be created, i can do it if you want.

ethnix73

You can also use a volume module. But you will have also to add a module per track. Perhaps another way would be to link your switch to a "create midi" module (one per track) linked to one "send midi to usine" module, and make midi learn on each mixer track, but i'm not sure it would lighter on cpu...

ethnix73

What's up?

What does that mean "listed in the training course 2011"?

ethnix73

Thanks senso and Merry Christmas to all Usine addicts

ethnix73

You can't yet download this addon...It will be available when Usine 5.50 will be out. I will upoad it on the addons sections, so yes you will need the pro version to download it... I need to work a little more on this patch because since a few weeks i'm working on an mlr/molar like patch. Thanks for...

ethnix73

I have not been able to do the script i need.... Anyway, i found a way to patch it: http://sensomusic.com/forums/uploads.php?file=wait%20x%20blocs.jpg This scripting technique is yet to difficult for the moment. I need to study more the use of array in scripts. Thanks for your help ,time, and knowle...

ethnix73

Thanks master Bsork!

Trying that right now...

ethnix73

Nice project gdlive!

ethnix73

One more time fighting with scripting, i don't understand how to wait x blocs or x ms before processing a new function or a new procedure in script... I've been looking to midi unpack , to unpack array but i've not been able to reproduce them in my newbie scripts... Any help from a script master?

ethnix73

i've just tested it, and it seems ok 23fx23!

I Will test it more heavily but anyway you saved my actual patches!

&

ethnix73

Thanks for your example and explanation 23fx23...

I'm working on an mlr like patch. Script is really usefull and low on cpu!

ethnix73

Thanks 23fx23!

i tried to use trunc or round, but i see that i had not used it correctly!
I added another script line after x :=GetValue (Index); like this Trunc(x)

So in script, we can encapsulate function within others with just parenthesis?

ethnix73

Thanks 23fx23!

Cool to try to help me...

ethnix73

Trying to dig in script, i face a simple problem, i'm not able to resolve. I want to get the value of an array (inlet) at a specified index (inlet) . If that value (y) =0, set it to 1. If that value (y) =1, set it to 0. But i've got parameter conflict between SINGLE and INTEGER with the function Get...

ethnix73

Yes, i've got some overloads with the midi driver for the launchpad

And it creates audio glitches...

ethnix73

i'm yet fighting againt scripting... I've tried to implement a function to unpack more slowly the array, as you can find in the unpack midi script with wait cycles But i've got big, enormous difficulties to understand your script 23fx23... Should i put it in the procedure callback? I've tried but wi...

ethnix73

Have a look here nofish:

http://sensomusic.com/forums/viewtopic.php?id=2410

ethnix73

Nice one!
I had a try and never finished the patch...

P.S: You will soon need a cure.

ethnix73

There is an inlet for velocity. So you can set different velocities for each note (=column) in toggle mode with an another matrix for example. This is not the "lighter on cpu" solution but i needed it for an important modification for the base patch for the launchpad, to make it polyphonic...I decid...

ethnix73

Thanks 23fx23, First step with velocity ( MidVolRange ) inlet is done... :) ////////////////////////// // ///////////////////////// // parameters declaration var RowIn : Tparameter; var OnModeIn : Tparameter; var OffModeIn : Tparameter; var MidVolRangeIn : Tparameter; var BaseOctaveIn : Tparameter; ...

ethnix73

yeah!

Thanks marvellous 23fx23!

I will try it on tomorrow morning...

ethnix73

Thanks for your answer martignasse,

I will have a look, and make some try even if it's a hard way...
Anyway, learning script becomes more and more essential, so i will start with this one because i need it

ethnix73

You can do like this joffo78:

ethnix73

I'm always a noob script but i would like to use this script found in the matrix pack. I want to use it with my launchpad patch, but i'm really enable to modify it... Is there any script guru who could help me to add velocity and note lenght to this script? ////////////////////////// // ////////////...

ethnix73

Useful one nay-seven...

ethnix73

you've changed your keyboard, your fingers or your eyes?

ethnix73

Great patch and great wiki!

Congrats soundmind...

ethnix73

Tested it quickly and it seems to be ok 23fx23!

No more error on init...

ethnix73

Hi 23fx23,

I've just noticed that there is an error with unpack array when it is connected to an empty matrix module, on initialisation of the patch...

Don't know if it's matrix or script related....

ethnix73

Hi caco,

A little request:

Don't know if it would be a lot of work, but could your module be compatible with arrays, like math modules are?

ethnix73

To come:
-Swing fonction
-Possibility to bypass some steps in the sequence

Playing with this two functions, autochord mode and alternate mode, you can achieve some interesting feelings...

ethnix73

Two little video with new functions:

Poor playing sorry

video 003

video 004

ethnix73

Do you use a combo box?

ethnix73

Thanks nay-seven...always interesting

Even if i would like to have a better understanding of dft and fft

ethnix73

Merci pour l'info Olivier. Super cool ces deux autres stages...Je vais voir alors.

ethnix73

Merci et avec plaisir héliouk6....

Tiens moi au courant.

ethnix73

Je viendrai bien...

Il y a quelque chose de prévu pour l'hébergement ou on se débrouille?

ethnix73

I don't know if it's script or matrix module related, but the exclu mode is not compatible with a preset manager martignasse....

ethnix73

It's strange, it's remind me a software i know, but wich one?

Do you have an idea nay-seven?

Maybe we should ask tp senso himself...

ethnix73

Perfect

Thanks a lot caco...

A really usefull one!

ethnix73

Thanks caco, i will test it ....

ethnix73

Check your mailbox dansro.

Concerning this patch, he will be out only when Usine 5.30 will be out....So, no way to beta-test it for the moment

ethnix73

Who would be ok for a groupbuy?

ethnix73

Finally, i've done it this evening

ethnix73

Yes, i will animate the patch and the launchpad. As it is quite easy to implement it, i will put it at last...

How do you enter directly notes in the matrix?
By converting index or by caption?

ethnix73

by curiosity , how many matrix module do you use..? Only one matrix because i stock the different values in arrays before the matrix. It's the lighter on cpu solution i've found , to deal with the incompatibility between exclu mode and preset manager . The patch uses 2.5% on an old athlon 3500+ and...

ethnix73

here is another video preview of this patch

Click here

ethnix73

caco, a little suggestion:

it seems that your user module adds some latency in comparison with Usine math modules....

For example, using three different A/B modules is calculated faster than your equation module.

Don't know if this is due to the sdk or your module?

ethnix73

Lately:

if you want to send sysex, you can use an array and a sysex editor:

you write,and can stock, your sysex in decimal in the array...

but i haven't got an fcb1010, so i can't test.

ethnix73

@caco:

i've added the pow function if you want to complete the description.

P.S: for using non-parsed blocks in the wiki, you can usually use the tags code or file, but strangely here it's a better way to use the tag html, from a graphically point of view...

ethnix73

Concerning real-time chord recognition, it might be doable by storing the note values, analysing the intervals between them and adapt to the desired scale....

Perhaps the main difficulty to sovle would the latency generated

ethnix73

interesting link sunhome

@nay-seven: auto-scale are easy to build with different mapper value ( or only one if mapper value goes up 32 slots)...i've built one in my launchpad step sequencer patch.

ethnix73

Yeah!

Thanks a lot...

Can give you a little help for the wiki if you want....

ethnix73

Yeahj!

Really usefull one 23fx23.

Thanks!

ethnix73

Forgot to tell you that it works perfectly 23fx23...

Thanks

ethnix73

@senso:
yes of course, this list box is still here because it was more convenient for patching.
I had already done the patch with grouped switch, but as this version had nasty bugs, i had to redo it from scratch...

ethnix73

@23fx23 and nay-seven: Yes, all function will be accessible from the launchpad. Concerning velocity , octave and lenght tab, i had done it in a previous versions, and it's easy to do. It is not included in this one because i wanted before to implement the preset manager with an exclusive mode matri...

ethnix73

Here is a little preview of a simple step sequencer with a launchpad as a remote midi controller. There are still a few minor bugs in this video, but they are easy to solve. Normally adding others others steps fir longer sequence will be included inthis patch. Others improvements like choosing pad c...

ethnix73

Nice tip in the wiki nay-seven!

ethnix73

Thanks 23fx23,

i will try this evening....

ethnix73

I need to use the "set array element" module and the "roll array" module. But unfortunatly, i did'nt find a way to use this two module at the same time, as my patching seems to prevent the "rollarray" to roll... . *does somebody have a workaround? Here is a screenshot: http://sensomusic.com/forums/u...

ethnix73

Nice one headphoner!

ethnix73

You can do like this:

To go quickly, you can put a sampler where you put your sample and get the list from the outlet commatext in a text module

ethnix73

I have perhaps found a workaround by storing the value of the matrix in an array, and stopping the flow from the matrix to the array when using the preset manager...

ethnix73

Thanks for your answer nay-seven.

But in my patch, this workaround does not work. Maybe because i set the cells from an external controller...So it seems that the preset manager is only able to store the last set cell.

ethnix73

I'm facing a problem with the matrix and the exclu mode patch.

When using the matrix in this mode, the preset manager does not seem to work.

Am i doing something wrong, or if not does somebody has got a workaround?

ethnix73

After testing you script bsork, it was [not] totally what i had in mind.

Maybe i'had read the first guru message too fast :rolleyes:

Anyway, may be usefull, thanks!

ethnix73

hehe!

This would be really useful gurulogic, agree with you...for myself, It's the main difficulty with monome and launchpad.

ethnix73

Good idea 23fx23, but would need a collaborative work, because i haven't got a monome..... I've nearly found a good way (light on cpu and stable :) ) to control the matrix within the launchpad like in mlrV...but it would need some modification to run the matrix in standalone... I will think about it...

ethnix73

I had a look to the monome forum before starting to make an mlrV patch. So yes, i've tested nonome...

How do you receive multiple message at the same time?
Do you mean with this kind of message:
/40h/led_col 2 255

ethnix73

yes, I have two 128's which I usually use as a 256.

Funny, because i've started an emulation of mlrV to use with a launchpad. Will be a big patch, so there is yet lot of work...

What kind of Osc message send a pad on a monome?
Osc=>Matrix and Matrix=>Osc might be doable, no?

ethnix73

maybe I should instead focus on making some Monome controlled applications in Usine.

You've got a monome gurulogic?

ethnix73

Thanks caco!

As said 23fx23, a great contribution!

ethnix73

ethnix73

I will need some launchpad users with usine to test a patch i've made.

it's a melodic step sequencer. The patch is just a draft for the moment, buti would like to have some feedback before finalizing it...

Any volunteers?

ethnix73

Thanks mister senso!

ethnix73

Yes, could be interested, but it depends of the cost....

ethnix73

Thanks bsork!

With the new vst params parameter, we can morph between two vst presets. I didn't noticed it!
Will try to make a little patch....

ethnix73

Is there anyway to smooth the values of an array?

From a set of value A to a set of value B for example....

ethnix73

@ gurulogic Taking time to report if it's a bug is usually quite fast... Often senso ask you for a patch, screenshot if he is not able to recreate the bug. If he has been already reported, he will tell you. To my opinion, the actual system is a good solution because: 1)it takes 5 minuse to write and...

ethnix73

Thanks for your answers, and nice one 23fx23!

ethnix73

quickly, thanks nay-seven.

Habits sometimes make you blind...:rolleyes:

ethnix73

Working on a kind of mlr patch for the launchpad, i'm facing a problem wich i'm not able to find a good solution: I would like to be able to quantize the impulsion (1,0) from the outlet " pass " from the module " midi filter "... I've tested a few solution like controling a pass event flow with sync...

ethnix73

Great one 23fx23 and really inspiring.
It's an example for me, trying to build an mlr like patch for the launchpad.

ethnix73

or this way maybe:

ethnix73

As always impressive work and done so fast!

ethnix73

I'm working on patches made for using the novation launchpad in Usine...

What kind of patches would be useful?

step sequencer? clip trigger? mixer?

Any idea, suggestion are welcome Usiners!

ethnix73

Interesting nay-seven!

Thanks for the link...

ethnix73

interesting one nay-seven!

ethnix73

Thanks caco!

ethnix73

Or another way, without lines, there.

For a lighter CPU use, you can replace busses with wire.I used them just to have a more clear patching...

ethnix73

I have a DIY analog theremin and I was able to convert the frequency to CC quiet good with USINE

Interesting!
How did you made your theremin?

ethnix73

Hello,

I do not know the formula, but you could use mapper (value) or (curve) module...

ethnix73

Thanks Olivier!

ethnix73

Yeah!

ethnix73

I'm working on an add-on to use the launchpad with Usine... The main problems are: Sending initialisation to the launchpad according to the workspace, patch, subpatch state. Using more than 4 pad at the same time can give unpredictable results... Anyway, Launchpad and Usine is a good solution. You'v...

ethnix73

And another one...

Will you stop Olivier?

Welcome to %s forums

Search found 584 matches

Login • Register