Welcome to %s forums

Développeur Full Stack Senior Spécialisation Audio Temps Réel & Show Control Présentation du poste La société Adamson Systems Engineering recherche un.e Développeur.se Full Stack Senior passionné.e par l’audio numérique, la programmation bas niveau et les technologies dédiées au show control. Vous ...

Hi Nikos, Welcome to Usine. Your post is great, it provides great feedback from great usiners. Here's mine: What kind of background or knowledge helped you understand Usine? I'm building stuff with Usine since the early states, around 2007-2008, when it showed up. Back in the ages, I made some progr...

Yes we are on vacation

Good tip. Thanks Jocelyn

Hello, No, you won't gain anything to move your fx in another patch or in a subpatche. Decreasing CPU consuming would necessite to make heavy calculation multithreaded, but it is not an easy task when it is related to audio. And the way omnisphere is calculated doesn't rely on Usine. The only way to...

I would prefer a complete, with ham, egg and cheese

Well done Olivar. I'll try to give a look at your work as soon as I can and propose something.
Cheers

Hey Olivar,

Good suggestions, but don't you think it is a Pandora box ?

Sylvain

Hi, Global Arrays are working really fine. It is one of the strongest features in Usine from these last years to have fast and strong access to data everywhere and communicate with shared Usines. Only one Global Array definition can exist since it is accessible from everywhere in the workspace. Glob...

Hello Hughes, Why don't you just deactivate all the racks in your second workspace ? You can easily create a small patch with the rack settings module, in a polyphony, with a constant=0 or a switch wired on the ON inlet and poly voice number wired on num rack. All your racks will be OFF by default. ...

Hi Eric, We don't have multidimensional arrays in Usine. We talked many times about that, but never went through. Actually, there's a solution if you really need it. A comma-text can be think as a multidimensional array, but you have to manipulation either string and data. There's an example in the ...

Hi, I haven't a clear answer to give to you. Mainly because I don't know your work and how it is organized. A few ideas : - scripting or patching : First, it depends on how you prefer to move into the code, with classical coding (scripting) or wires. Sometimes, scripting is also very helpful to clar...

Hi
Select the sampler and unchecked saved in preset. The samples won't be recalled with preset anymore.
For parameters, you need to create controls to keep them in the preset.

Best
Sylvain

Hello,
If you pin a module, that means you already accessed it.
By clicking on a control like a fader, you can use Ctrl-P to find it in the patch.

Best
Sylvain

Dans le fader text en bas, entre les faders que tu veux modifier : 1,3,6>10,12,15>18 par exemple. Tu sélectionneras 1,3,6,7,8,9,10,12,15,16,17,18 La flèche > est pour sélectionner un groupe de faders qui se suivent. C'est ce que tu avais demandé, un petit script assez simple. Sinon, tu peux cliquer ...

Hello Joffo, Petit add au patch d'Olivar, la possibilité de rentrer des valeurs niumériques. Aussi, shift-click pour sélectionner les fader à la souris. Et l'incrementation est de plus en plus rapide quand le fader s'éloigne de sa position de repos. Je pense que ça te fait une bonne piste de travail...

Hello,

What do you mean by loop mode. The sections can already be set in loop mode, as the main grid. BTW, it is the default mode.

Sylvain

Hey the community, All the BrainModular and BeSpline team is glad to wish you a great new year. 2025 is the square of 45, it hasn't appeared since 1936 and won't appeared until 2116. So, only one time in our life. And 45 is 20 + 25 !!! 1+3+5+7+...+89=2025 And the Nicomaque theorem: 2025 = (1+2+3+......

Top, super beautiful. I love your vintage side, Olivar

And it fits in my backpack... well, without the computer, without the sound card, without the other controllers.

Hello Joffo, Pour la sélection multiple, tu peux utiliser l’outlet selected de tes faders et remplir des tableaux. Utilise des GlobalArrays pour ça,c'est très efficace. Tu peux visualiser ta sélection en changeant l’opacité de tes faders une fois sélectionnés par exemple. On fait des faders d'incrém...

Hello,

Using a file lister with a clock on refresh (directed to your history folder). Has changed on the commatext output.
When your file is saved, your history folder gets a new file, so the commatext output of the file lister has changed.
Or dierctly directed to your save folder.

Sylvain

A module control listbox ?

Bonjour, Je crois que la question était la suivante : peut-on utiliser 127.0.0.1 quand on a un autre réseau à disposition (qu'il soit filaire, WiFI, ou qu'il y en ait plusieurs). Je pense qu'Usine ne voit plus le réseau local quand un autre réseau est présent. Est-ce une limitation d'Usine ou du l'O...

Hello,
Yes, you should have a look at the inspector. It's new in HH6 but very powerful.
Sylvain

Hi,
On my end, text doesn't react, but matrix input works as expected.

Sorry, i haven't found time to dive into your script too much.
Sylvain

Hi Woodslanding, It is not an easy task to answer to your message. There are many ways to adapt CPU load, but depend on every configuration. And yours seems pretty big. Can you share your work ? In a private message. Then I can see how you handle this and give you appropriate answers. You have dynam...

Hello, Yes, mulitmonitor apps are a good alternative, but can be tricky when there's a lot to do. Using Global Arrays is a really good solution, easy to implement (once you have made one or two to get the idea), strong and efficient. It can be a huge work if you want to duplicate all your wkp. But, ...

Bonjour Elsa, La solution avec une application qui peut recevoir de l’OSC est celle que je voulais te proposer. Envoyer ton chronomètre toutes les secondes me semble au contraire beaucoup plus fiable. Si un paquet est perdu, ce qui est peu probable, une seconde ne s’affichera pas, mais à la suivante...

Hello, There already is a scrolling function in the grid. Maybe, the simplest solution would be to keep the current section in the middle of the grid and not on the right. Visual continuous scrolling could be unefficient as it would affect the graphic engine of Usine, and not really usefull. Let's h...

Bonjour, Je n'utilise pas de MIDI clock, donc je te fais une partie de la réponse. Je ne sais pas si tu peux envoyer directement un tempo. Je dirais plutôt un signal de synchro. A priori, l'information de clock est envoyée en MIDI, 8 fois par temps. Tu peux essayer le montage suivant : le signal de ...

Hello,
If Spat Rev is working well on PC, there is no reason to have any conflict with Usine.
Sylvain

That is great

Enjoy

Hi,

Did you get a try to TouchOSC on your phone ?
I think you can now access to the gyroscope of your phone, and you'll have many switches and faders available. Can be a good alternative to Wiimote.

Sylvain

With HH6, most of the modules are capable to deal with arrays. The inlet stays purple, but an array can be connected and the module calculates all the values. Integer or float. And for sure, when an array of values make sense.

Sylvain

Hello, I don’t know how your workspace looks like. Just as a reminder, Usine is very efficient with multithreading. The CPU consumption you see in Usine correspond to the thread that is the most consumption, not the full consumption of the CPU. Refer to the OS CPU overview. If the total consumption ...

Hello,

Quite simple. Connect the CommaText output of your Listbox to a CommaText Get String module. The index input should be connected to your number sequence. Here you are.

Sylvain

Hello,
You don't need a pass if change before the GA Set, it is included in the module by default. It can be deactivated if you need to.
Sylvain

Hello, Lemur would have been my first choice. I used it a lot, especially because it could worked wired with USB betwen iPad and Mac. Fast and efficient communication. But not supported anymore. Unfortunately 😒 I agree with Olivar. If you can use a Windows engine as tablet, go for Usine. It is the b...

Hello,
You can resize the window of Usine in the way you want.
I guess, if your screen is set to portrait, Usine in full screen will adapt the full screen in portrait mode.
Sylvain

Hello, Unfortunately HH3 is quite old and it's difficult for me to give some support on it. Regarding your thing, not sure you can to something easily. Text and commatext manipulation is a nice add of HH6. Before, it was a bit tricky. You'll probably need to use one text panel per text line, then cr...

Hello,

It s probably a bit premature to talk about this concept, it has just been implemented a few days ago.
The idea is to put tags on some modules or patches to make your work easier to understand.
It is related to the inspector window and mainly used by developpers with huge workspaces.

Sylvain

Hi Olivar,

Don't use "specific" Wi-Fi router.
If you encountered some issues with Wi-Fi communication, I don't think it is related to Global Arrays.

Sylvain

Hi,

I'm not experienced with this protocol.
Give it a try. MPE is an extension of MIDI protocol. It should be readable in Usine.
Maybe you'll need a bit of filtering to keep only valuable parameters.

Sylvain

Hi,

I haven't used a Wiimote for a while now.
I rememeber that some models were not seen in Usine.
At that time, it didn't work for me. I used OSCulator to receive the Wiimote data and send them to Usine as OSC commands.
Good luck

Sylvain

Hi, Touch and mouse are almost the same. When you put your finger on the touch screen, the arrow of the mouse appears. What can happenned is your fader was still selected on the touch side and you used the mouse wheel. Anyway, several tricks to try. Disable mouse wheel on controls only used with tou...

Bonsoir Damien,

Il te faut mettre cliquer sur le combobox "set tempo" et choisir "set tempo to".
Apparaît en dessous une fenêtre "list of bars" pour écrire ta nomenclature.

Sylvain

FletcherMachine ORG.png Dear all, At BrainModular-BeSpline-Adamson, we are pleased to announce the release of FletcherMachine version 2, our spatial audio mixing solution. Introduced in 2022, the powerful FletcherMachine object-based immersive mixing solution has established a loyal following thank...

Bonjour Elsa, Je comprends l'utilité du lasso, et ne sais pas si c'est facile à implémenter dans la grid. Mais peut-être qu'une petite solution simple peut résoudre tes problèmes. Tu peux insérer une section facilement, ce qui évite de tout déplacer. Mais peut-être que tu cherches autre chose. Sylvain

From my point of view, prefer GAs over MIDI busses, easier and more direct to use. Data busses or MIDI busses should work but less efficient.

Hello, We use all the time Global Arrays over Wi-Fi and it works fine. And we send a lot (hundreds) and sometimes quite huge GAs. In it design, communication between computers was one of the main point of GAs, wireless or over Wi-Fi. I assume you use the shared computer feature with Usine. And send ...

Do not delete the lines, just rename your Global Array

Hello Seb, Having two Global Arrays with the same name won’t work for sure. But it shouldn't crash Usine at startup. You can try to open your workspace with a text editor (Visual Studio Code is good for that), find the Global Array, delete the corresponding lines and save (under a new name). If you ...

Hello,

Si tu changes d'ordi, tu passeras certainement à 11. Sinon autant restées à 10.
Windows 11 tire de plus en plus vers MacOS.
Pas de problème à signaler concernant Usine de mon côté.

Sylvain

Ça c'est une bien bonne idée

Usine on its summit, at an unreachable level of maturity. Congratulations

It looks like an Happy New Year, isn't it ?

Bonjour, Oui, il existe de très bon plug-in pour ça, c'est une raison pour laquelle nous nous focussons sur d'autres sujets. Anyway, il faut malgré tout garder en tête que récupérer la hauteur d'un son trop complexe restera une gageure. Par exemple venant d'un on produit par un sampler granulaire. S...

Looks promising
Congrats

You can use inspector window for this. (magnifying glass).
Comment module in your sub-patch, with dedicated strings, then find strings, double clic. It's done.

Is it a joke

Hello,

I understood quite well your problem.
I often have that one also.
I don't think we have a solution that can work globaly. So, it will introduce options here and there.
Then, the way GUI is developed in Usine won't allow us to do this in a simple manner.

Sylvain

Hello,

I'm using MacBook Pro M2 Max intensively for a while now. Works fine, silent, powerful.
Didn't deal to much with audio, so no feedback here.
Usine HH6 works well on last OS. (Didn't test Sonoma yet but Senso said it works).

Sylvain

Sylvain

Bonjour, Malheureusement, je ne suis pas sûr que Usine puisse répondre à cela. C'est un environnement modulaire qui peut changer dynamiquement. Donc le nombre d´inputs peut changer en cours d'utilisation. Nous ne pouvons prédire ce que l´utilisateur va faire. Dans un DAW tradition c´est le cas, une ...

Hello,

Yes, it is possible.
Deploy the module, find "back bitmap" string inlet. Here, you will enter the address of your .png
If you change the address, you change the image.

Sylvain

Hello

Strange, works fine on my end.
Which OS ? Which version ?

Sylvain

Hello,

Not sure I really understood your request. Can you be more precise ?
Thanks

Sylvain

Ahah, marrant, j´ai enregistré ce disque. Une partie du moins.
Souvenirs souvenirs

Bonjour,

Très aisé dans Usine, aucun calcul nécessaire, le boulot est déjà fait

Tu peux utiliser le module "tempo to delay".

Sylvain

Hello,

You can find a workaround with switches and binds.
Then, I answered in the other post.

Best

Sylvain

Hello,

We'll have a look on this. Could be implemented, upcoming HH6 only.

Sylvain

Hello,
Known issue. Actually don't know if it is an issue. I use a lot that part when patching to display values and track bugs. So, don't care about positioning

We'll see what we can do for this.

Sylvain

Hi, Actually, I think it is pretty easy with only one preset module. The module has save and load capabilities. So the save is your BANK with PRESETS inside. Then you juste have to load a specific file to change your BANK. Used a lot, very powerful, efficient and strongly coded. I can recommend 👌 Sy...

Recharge, il manquait un X !!!!

Hello,

Un truc comme ça ?
Tu as le texte sans les X, ça c'est pas compliqué.
Et tu as chaque ligne sans les X

Sylvain

selector.pat: (28.74 KiB) Downloaded 765 times

Hello,

Did you check your rack settings ?
By default, a rack is calculated in serie. But there is an option to use them in parallel. Maybe you selected parallel and forgot it.
Otherwise, I don't know, it seems you did it correctly.
Can you share you're project ?

Sylvain

Hello,

Tu peux essayer le Panel Matrix. C'est inclu et peut-être que ça fait la blague ?

Sylvain

Hello,

Available on Panel Matrix. Maybe it can do the trick.

Sylvain

Hello

Working with HH6, coming soon.

Sylvain

Hello,

I would probably chose the second option, make more sense to me. But at the end, both are correct.

Sylvain

Hello,

It is for convenience and patch organisation.
Everything is handled from top to bottom, audio in and out, data, string, array .....

Sylvain

Hello,

Please, share your workspace to have an Idea about IB CPU consumption.

Regards

Sylvain

Bonjour Gwenaëlle,

Je pense qu'il y a une incompréhension.
Que cherches-tu à faire ? Qu'entends-tu par Programmation Orientée Objet ?
Il me semble que tu te fais une idée de quelque chose et que tu colles un terme inapproprié dessus ou vice-versa.

Bien à toi
Sylvain

Bonjour Gwenaëlle, La Programmation Orientée Objet, POO, est un paradigme de programmation, une manière de programmer. Usine est en partie programmé comme cela. Mais à mon sens ça ne te dispensera pas de "te mettre au code", car c'est un langage type C++, Python, Java, etc, que tu vas utiliser. C'es...

Hello Damien,

Oui, désolé, je ne peux ouvrir ce wkp non plus.
Tu as bien décris le principe de ce patch, quelqu'un va certainement te proposer quelque chose.

Sylvain

Usine has 5 000 users all over the world !!!! I hope more than 5 are aware of it

Thanks for your kind words Eric. Usine has jumped a big step ahead these last two years. This is not shinny, , not visible, but inside, the core is more efficient than ever, more stable and powerful, and capabilities are awesome. A really unique piece of software that can handle so many situations. ...

Hello,

Yes, part of what I announced.
I didn't notice it has already been available.
Breakpoint acts as in a classical coding environment.
It is very powerful as you can show multiple wires or modules. I was able to correct bugs I can't before this feature.

Sylvain

Hello, First point : good suggestion, I've often had that in mind, would be efficient. Maybe there is a reason that don't allow this, I will check with Senso. Second point : could be easily achieved : monitor value.pat Again, many new tricks are going to be provide with the next major release to sim...

Hello

I think that everything you're looking for will be implemented soon. Be patient.

Sylvain

Setup, expert tab : disable show trace on error

Hello, You're right on many topics, reality is not so simple 😁 Script doesn't refer to a file on your hard disk, it is included inside the patch itself. So, to be able to send to an external editor and to reload, you need to refer to a file. Then, it leads to issues very quickly, changing anything i...

Hello,

You're right, affecting color to preset is no more available.
It would be under discussion shortly.

Best

Sylvain

Good suggestion

Hi,

Yes, often in discussion. Always not a priority.
We also use VSC with copy/paste back and forth.
It's obviously a good suggestions.

Sylvain

Hi,

Yes, often in discussion. Always not a priority.
We also use VSC with copy/paste back and forth.
It's obviously a good suggestions.

Sylvain

Hello Olivar,

A knob, aperture to zero (design param) and circular mouse checked (mouse param). Done.

Kind regards

Sylvain

Wait and minus show me a modification. The array has only 0 if nothing changes. On change, one value of the array is <>0. Abs is there to have always a positive number
Concat to add a value in the array and avoid 0 for MaxPos. It is a little trick not easy to explain and maybe to understand.

But yes, usually answers are quick with BrainModular and the community.

Haha
I'm loosing my time in airports, flight delayed, rebooked, delayed again, connexion lost, rebooked again, delayed again and again .... A nightmare since 7.00am to reach Milan from Oslo, and it's not finish yet.
Can't really work so I make simple patches for usiners

Hello

One idea for three faders.
You can continue.

All the best

Sylvain

Control Change 2.pat: (42.33 KiB) Downloaded 743 times

Hello,

Some ideas !!!!
Plus a script for alphabetic order of commatext.

Sylvain

random word 2.pat: (153.19 KiB) Downloaded 750 times

Hello,

I think it won't be possible to keep the patch editor open.
But remember you can launch several Usine simultaneously. Very usefull for comparisons. And copy paste works between to Usine (at least on Windows).

Sylvain

Hello, 1) I said something wrong, there already is a way to edit the size in patch and in IB separetely. But it seems it's not working. I will talk with Senso. But as you see in the workspace we edited together, there are many ways to achieve what you are looking for. 2) Maybe it is a good idea to a...

Hello,

This is a design grid. You can size it and snap elements on it.
Right click on an empty space in IB (also available evrywhere, patch, container, popup ....), select param editor section; then align to grid section.

Sylvain

Hello, You're right. Sorry I did the patch quickly and didn't see your MSB, LSB snd PC listbox were different. Your patch is correct, you can simplify several things, and work on the organisation, to be more comprehensive. Use "thru" modules as I did. But this is personal. Sylvain FP-30X programs be...

Hello,

I think this patch would do the same with less modules and with possibility to design IB and patch separately.
All the best

Sylvain

FP-30X programs.pat: (58.45 KiB) Downloaded 727 times

Yes, it is something very usefull. I have win hours when patching with this tool.

Hello, Two topics there. First controls in patches/racks and IB. In my opinion, it is unsolvable unless creating GUI setup for patch and GUI setup for IB. This option is not relevant, you can imagine. I can understand that you want to control a param from both side. Why don't you use two controls, o...

Hello, Yes, this is a discussion that comes back often. Usine is so big today, you can't imagine. You can create a standalone application very easily (Expert Version). But a plugins is another thing. Could probably be done for small patches. But where is the limit ? It is on the table. Let's see but...

Hello,

Beta version is fully working, it is just a beta version.
I'm using it only.
To access to all the features, this is the same as for the official release, it depends on the paid version you have. Expert configuration is only accessible with Pro and Expert version.

Have a nice day

Sylvain

Hello,

Yes, you're right, this is a known issue. We are working on it, but it's not as easy as you can imagine.
Inlet/outlet on module are not all the same, some are direct access, other not. Tricky to explain.

Sylvain

Hello, Multiple edition could be usefull sometimes, but in general, I think it is useless. However, Usine provides many simple tricks to be fast on GUI design. You have what mentionned Senso and Woodslanging. Very usefull. Using size & position faders in the param editor leads you to fast and effici...

If you hit "apply & reset" on a polyphonic patch, you will recreate all IDs, so your presets are dead. There's currently no way to deal with this without break all the presets for everyboby !!!! But there're new ways to deal with polyphonic subpatches. Use Global Array. In the example below, you jus...

Usefull for lightning.
Desactivate ArtNet in the setup and they will disappear from the title bar.
Sylvain

Hello
The first time you launch Usine on Mac, don't use double click. Use right.click and select open.

Sylvain

Hi, Your feedback is true. But we recently added an option for this, maybe not in the manual. In the setup of your control, remote setting, you have a user address filename. I think it probably do the trick as it is no more related to the location of your control. It is also directly accessible via ...

Coucou Olivar,

C'est cool si on peut compter sur toi aussi.
Parlons en ensemble, avec Senso et Joffo et préparons un projet pédagogique.

À+++

BWF looks to be able to embed markers so maybe Senso would be able to import them. Maybe we could have a look on this.
Sylvain

Bonsoir Gwenaëlle, Il n'est pas forcément aisé de t'aider car ton projet semble très ambitieux et que nous n'avons pas tous les éléments. J'ai l'impression que tu sautes vite sur des solutions sans avoir bien borné ton histoire comme je te l'ai suggéré dans un précédent post. Bon, la grille, il y a ...

Bonsoir Gwenaëlle, Usine est l'outil de rêve pour organiser des environnements génératifs. Entre autre sur ce que j'appelle de l'aléatoire contraint. La fonction randomize n'a pas nécessairement besoin d'un "button", mais d'un "trigger". Ce trigger peut être généré par beaucoup de choses dans Usine,...

Hello

Unfortuately not tested with audio until now.
But it works without any problem with a data workspace you can't imagine the size and the complexity, more than 35 000 modules, not a joke.

Sylvain

Hello,

Regarding presets, I do not have any problem.
Can you share something to point it ?

Regarding the last version, known issue, will be corrected.

Best

Sylvain

You're wellcome. Just FYI, polyphonic sub-patch could also now be multithreaded, but this is the same, be carrefull, it could be worth, depending on many parameters. Those features could be very interesting in heavy processing, but you'll need to be deeply aware of multithreading and use them with t...

Hello, This option has to be used carrefully. You can use it effectively when you have a lot to calculate. If you have just one patch, this will not change anything, only for several patches. One thread per patch. But the reason to be carrefull is that you don't know the order of calculation. So it ...

Le preset de patch est sensé enregistrer tout ce qu'il y a dans le patch, sous-patch compris.
Le module preset permet de choisir la cible.

Le preset de patch est sensé enregistrer tout ce qu'il y a dans le patch, sous-patch compris.
Le module preset permet de choisir la cible.

On peut effectivement utiliser le module preset. Il est très utile si on veut par exemple faire un preset d'un sub-patch. Sinon, il est useless, mieux vaut directement utiliser la méthode décrite précédemment.
Pour le message d'erreur, je vais laisser Senso répondre, ce n'est pas mon rayon

Sorry
A small patch would be better than a doudtful explanation.

sampler-pianoroll in sync.pat: (31.06 KiB) Downloaded 731 times

Hi, Not so easy to synchronize two modules which don't deal with the same timestamp. One refers to is own time, in ms, the others to beat clock. If you plug the sampler pos*duration/1000 to ppQpos, your pianoroll will play at tempo 60 but following the sample. So, if your samples have a length which...

Bonjour, Je privilégierais une gestion des presets en interne. Comme ça, tu gardes la grille pour autre chose. Un fader en "integer", avec un max correspondant aux nombre de presets, un button sur le randomize. Tu peux le faire directement avec le module "Usine Patch Settings". Tu fais tes presets n...

Unfortuately, as this solution is powered by BrainModular for BeSpline and Adamson Systems, no way to find this in Usine.
But follow the topic !!!!

Hello, In Usine Setup, you have "Expert" tab. You'll find several startup options. Enable "Show Interface Builder". That's it. But maybe you need at least a Pro Version for this tweak, not sure it is available on smaller version. But you can also patch it with the Master Settings Module : On Init - ...

Bonjour Gwenaëlle, Ton projet a l'air fort intéressant. Et tes questions pertinentes. Il y a tant de manières d'aborder les choses. Difficile de te répondre précisément, il manque trop d'informations pour cela. Quelques réflexions cependant : Souvent dans un processus de création, on a des idées au ...

Bonjour Gwenaëlle et la communauté, La formation est une donnée importante pour aborder Usine, tant ce software est riche et complexe. Pour paraphraser Senso, c'est le plus compliqué des logiciels simples ou le plus simple des logiciels compliqués. À travers cela, je pense qu'étre formateur sur Usin...

Hi Creal, This is a good suggestion that is currently under discussion at BrainModular. It is not so easy, not regarding the amount of modules available but due to the way the inlets are currently displayed and/or calculated. Usine becomes more and more powerful on the programming side, the BrainMod...

Oups, you're right

Great. Remember you have an option in the combobox or list box to hide the path and extension. No patching needed.

Bonjour, Il faut ignorer le message d'Usine auquel tu fais référence. Le développement d'Usine est journalier, ce qui veut dire qu'en interne à BrainModular, une, deux voir dix nouvelles versions d'Usine sont créées chaque jour. Mais elles ne sont pas mises en ligne à chaque fois. Donc un wkp ou un ...

Hello,

Very simple. Add a combobox or a listbox. Wire the commatext output of the sampler to the commatext input of the combobox. Then send the text out of the combobox to your OSC send module. Between sample number and combobox, add +1.

Sylvain

Hi
I think it is easier to use a panel image in a popup window you can resize easily.
Sylvain

Hi, Generally, an endless encoder will send two values, one for up and one for down. Sometimes more regarding the speed of rotation. So, it is pretty easy to deal with that to drive a knob in Usine with increment/decrement value. Maybe Senso will make an update soon to deal directly with that but he...

Les modules d'Usine sont riches, de plus en plus riches, parfois on cherche un peu, mais on trouve toujours ce qu'on trouve. Merci Senso.

Did I miss something ?
For me, you have nothing special to do except changing the output device to send the signal to the outputs you want.

Remember that iaudio outputs are ordered from top to bottom.

Sylvain

Live from Infocomm in Las Vegas, beSpline SAS and BrainModular are very proud to announce the introduction in collaboration with Adamson Systems Engineering of the Adamson Fletcher Machine, a new audio rendering processor for immersive mixing that’s designed to offer simple operation with efficient ...

Ok, 4 synchronized values to store. But how many time ? 100, 1000, 10 000 ? New modules appeared in HH5. Global Array. They are very powerful for many reasons. You can store them in presets or in a file. And can deal with a very large amont of values. Not easy to use, but you're not new in Usine 😉. ...

Hi,

Not sure that Usine will load several time in memory the same sample used in different players.
Senso could confirm.

Sylvain

Hello,

You can with Usine samplers generate automatic saves with random names, so with these names assign new samplers instantly.
It is very usefull. I use it often. Just needs to think to empty your "buffer" folder time to time.
Hope it helps.

Sylvain

Depending on how many values do you want to record, you probably can do something with arrays, there were so many improvments these days with this technology in Usine.

Correct

Hello,

Yes, surely something interesting there. CommaText would be simple, but maybe to much outlets.

Sylvain

Bonjour Elsa, Je pense qu'en terme d'accès disque, des fichiers mono, stéréo, quadri .... ne changent rien, et lire 27 fichiers en même temps n'est pas un problème. À toi de voir en terme de nombre de modules et de câbles. N'oublie pas de mettre tes samplers en accès disque, sinon tu vas blinder la ...

@Simon,

Did you study the new possibilities provides by new modules : Global Arrays ?
These new features developped especially for a big project closed to Usine is very awsome and you'll certainely find new ways for creating complex preset capabilities for all your workspace.

Sylvain

Bonjour,

Je pense que pour des gros fichiers son, il te sera plus sûr de lire des fichiers stéréo ou même mono en synchro qu'un fichier entrelacés de 27 canaux. Je ne suis pas certain que d'implémenter du rf64 dans Usine ait du sens. Mais peut-être que Senso le fera.

Sylvain

Hello,

I can confirm.
The delete button is linked to current combobox and not to num store/remove.
Will certainely be corrected in next release.

Sylvain

Hello, Two inputs for your questions. - when the audio engine is not running, the CPU consumption shown close to the green arrow is 0%. It insures you that your in trouble. - in the module "setup settings", you'll find an outlet "audio engine running" you could connect to a switch and put it in the ...

Hello Simon, Interesting tonic indeed. For point 1 to 4, just click compile in the script to initialize local and global objects. I think your last point is true. Maybe Senso has a reason to do it like that. In the meanwhile, changing that will break all the scripts done before for all users. Not su...

Did you have a look on the new presets manager capabilities in HH5, with the possible save and load ?

Sylvain

Hello, In HH5, you can save your presets list as a text file and reload it with or without confirmation. I think it could be a good solution for you, same preset file for all your plugins, with the address as a text input and a trigger "on initialisation" and you always recall the good preset. If yo...

Hi, I'll try to give you an answer. Your suggestion is relevant and it is not. For sure, the patches ibrary could be extended, but is it the goal of Usine ? Not sure. BrainModular is a small company, nothing comparing to Native Instruments or Abelton which have many developpers and designers. The go...

You can create a MIDI bus to send MIDI everywhere you want into your workspace.

Hello,

Some library patches were moved to add-ons library with HH5.

Sylvain

Bonjour Gwennaelle

Essaie d'utiliser le forum français.
Pour les bugs, il est plus efficace d'envoyer un mot sur support@brainmodular.com en détaillant ton problème.
Tu peux retrouver des étapes précédantes de ton travail dans la poubelle, onglet en bas à gauche.

Sylvain

Hello, For modular wires, you can clic on a wire connection will select the wire, then you could move it to another connection or anywhere to delete it. If you have several wires on a connection, clic several time to select the wire you want to edit. In the patch, shift-clic on an inlet to select th...

Hello, For modular wires, you can clic on a wire connection will select the wire, then you could move it to another connection or anywhere to delete it. If you have several wires on a connection, clic several time to select the wire you want to edit. In the patch, shift-clic on an inlet to select th...

Hello,

You can find all the pictogrammes used in Usine in the ressources folder, then pictures folder. On Mac OS X, right clic on Usine and select "show package contents".

Sylvain

Hello,

The problem is known and will be solved soon.

Sylvain

I understand your concern. It was discussed many times together with Senso and on the forum. But Senso is right. For one or two users (ok, ten users), it could be possible to do updates with less files. But impossible for the rest of the community. And it is impossible for Brainmodular to deal with ...

I do not think of solutions, but for sure, it's a point that could be discussed and that Senso keeps in mind. How many time he saw me deployed a 64 "xyz draw" module to look at an inlet I couln't find because the module is far too long !?!

Understanding multithreading is very important to work with heavy workspaces in Usine. You can find many informations in the manual and Senso wrote some important things. It took me a very long time and hours of discussions with Senso to have a clear understand of what happens and how to deal with U...

I've seen this type of message many times before in other softwares, it warns you about the fact of trying to open a project with a prior version of the software and a possible malfunction of it due to a potential incompatibility, but the software lets you open the project, it is only a warning mes...

Hello,

When you save a patch or a workspace with the version of Usine dated 210906 ans open it with an older version like 210802, this message appears. It's normal. In 99,9% of the time, there's no consequence.

Sylvain

David,

Tu peux rajouter une fenêtre popup avac un button (avec key learn).
Tu fais afficher toutes l'EQ dans le popup et tu pourras directement l'afficher avec ton key learn.

Sylvain

Hello,

You can duplicate a section and move along the grid.
Select the section, clic duplicate on the left column. Then clic, drag and drop the section.

If you change a patch or rack you have put in the grid, it will desappeared from the grid.

Sylvain

Usine HH5 with the expert version will propose simple solutions to create standalone apps for your workspace.
But do not expect any VST solution. Usine is far to big to create VST, as it deals with to much domaine : audio, dmx, video, OSC .....

Sylvain

Hi,

I can't reproduce the problem, everything looks good for me, on OS.X

Regards

Sylvain

Hello guys,

It is probably a good suggestion, but remember you have a special line at the bottom of the grid called info. You can add text here to explain a section.

All the best

Sylvain

Hello guys, Je n'habite pas Marseille ou la région, mais une petite info tout de même : lundi soir, 5 juillet, je serai au théâtre de la Criée pour sonoriser un spectacle : https://www.theatre-lacriee.com/programmation/saison/la-contessa-de-numi-la-querelle-des-dieux.html L'intérêt est le suivant, l...

Whouaou !?!
This looks like such a big step. So many new features and improvements. Exciting to look forward.
Usine will definitively be the one.
Congratulations.

Bonsoir Hughes, Oui, parfois il y a des soucis avec les drivers sur Mac, et ceci en fonction des OS. Le problème est complexe, Apple change d'OS tous les ans à peu près, comme tu le sais. Le dernier OS n'est pas fini d'être débuggé par Apple qu'ils en sortent un nouveau avec de nouvelles problématiq...

Hello,

Grain Cloud FX is not a sampler, it doesn't produced any sound, it is an audio FX modifiyng audio input.

Sylvain

Hello, Zynaptic Morph looks like an interresting tool. It could certainely be implemented with Usine modules, FFT probably as Senso said. But I can ensure you that will be a very big deal. You'll need to understand deeply how it works, which algorithmes it uses. Then you'll need to implement those a...

Hello,

The menu from the gear ion is the devices menu.
Remember that those devices are simple patches, so you can easily edit them. And add a volume module with a mute switch. Then, you activate or not audio input.

Sylvain

Hello,

You can use the "Patch On/Off" module to activate/desactivate your patch dynamically.

Sylvian

Bonjour Eric,

Difficile de répondre à ta question sans avoir le problème sous les yeux.
Envoie peut-être un mot à Brainmodular, support@brainmodular.com, tu peux y joindre ton wkp avec les problèmes.

Cordialement

Sylvain

Have a look in the library, you’ll find many examples you can then tweak for your purpose.
And remember, Usine could be a powerful random machine, very usefullly for generating something.

You have the same problem with the common video player. If think it is due to video compression codec. Have a look here : http://www.brainmodular.com/manuals/hh5/en/modules/video/video-player You'll find a switch called "jump to key frame" on the video player, it looks better (badly, it's not workin...

Could you be more explicit ? There're so many way to do generative music, light or video : working alone, reactive to sounds, modular synth, groove machine, repetitive, endless, noise, slice, pixel mapping .... Usine is by nature a generative machine. You'll find some exemples in the audio synthesis...

Hello Cmodica, Yes, you can zoom vertically in the grid : just put your mouse on bottom of the line header, click and drag. Double click on the line header will minimize the line. Fit size button will resize all lines to default value. There's another idea with the grid : as you can now put almost e...

Video Loop.pat: (40.32 KiB) Downloaded 492 times

Something like that ?

All the best

Sylvain

Bonjour Xavier, La détection de mouvement avec PoseNet est une nouveauté d'Usine, le module sera disponible avec HH5. Encore un peu de patience, ça va arriver, avec de nombreuses autres belles et grandes nouveautés, des nouveaux modules à la pelle, de nouvelles possibilités de patching simplifiées, ...

Remember that the CPU consumption provides by Usine is always an average. It's almost impossible to predict CPU peaks.

Did you encountered that everytime or on special location ?
Maybe, on a specific section you need a big recall, too big and you have a CPU leak !?!

Sylvain

Hello Grego Bonne année Alors, pour le SMPTE, rien de plus simple : - module Get SMPTE, tu peux facilement remplir un tableau - module Set SMPTE : un "button" sur l'entrée "millisecond" et zou, un restart SMPTE, même sans "pass if changed" - pour le REC, malheureusement, on n'a pas d'accès (en tout ...

+1, maybe some new stuff with HH5.
Road map is very heavy, but ti could be in the pipe

Sylvain

Love this guy, his work is awsome.
Yes, Usine can do the job in a real good way.
Really no time for that yet, but maybe later.
All the best

Sylvain

Hello, A priori, rien à voir avec ta carte son, même si elle a du jitter, et même beaucoup, tout doit rester synchrone à l'intérieur d'Usine, et même de ton ordi. Et ce jitter restera imperceptible dans le cas d'un clic pour un batteur aussi bon soit-il. Donc le problème ne vient pas de là. Ni du pe...

Welcome to %s forums

Search found 489 matches