LaunchControl XL Light Mapper

[cmodica]

Hi all.

I try to build a patch for LaunchControl XL.
I build one but I am sure there is a better way to do that.

The one that I patched, works but it is not optimised. I try to explain.

I made a user template for the LaunchControl Device. All midi messages are sent on channel 13, and I affect specific CC numbers for the knobs, buttons, and faders.

I observed that there are 3 possible colors for the button, and different intensity for each color.

Send the CC with code 2 = 60 turn on the red Light
Send the CC with code 2 = 15 turn on the green Light
Send the CC with code 2 = 127 turn on the white/yellow Light

I use a mapper values to adapt the color that I want to each button.

This is my Patch :

LED Mapper LaunchControl-XL.pat

LaunchCntrol-XL

(35.72 KiB) Downloaded 348 times

I tried to find a way with the matrix or array to build this kind of patch. I would have a more flexible way to assign colors to buttons, whatever the CC number.

I dreamed a way of choosing each color for each buttons in a list box or something like.

I’d like this patch should be useful With LaunchControl XL and LaunchControl.

I imagine assigning the CC numbers or Note ON, by pressing the buttons, and chose the right color in a list box.


I don’t know, something more flexible and useful.

I try to analyse the “LAUNCHPAD wizard.pat”, but I didn’t understand and can’t find a way to do that I planned.
download/file.php?id=59

My Patch works fine, and I will play with it. But perhaps someone could help me to make it better.

Thank you.

[nay-seven]

Not easy to help you, maybe joffo who create the wizard can maybe help more,
i have this controller, but not the same template, so your patch don't work for me, maybe share your template ?

[cmodica]

Thank you.

This is the Template :

Launch_Control_XL_Mapping_User-1.syx.zip

LauchControlXL-cmodica-template

(931 Bytes) Downloaded 655 times

[nay-seven]

thanks , gone to check
question do you use your launchpad only inside Usine or for external control ? ( soft ou hardware)

[cmodica]

Only inside Usine.
Thank you very much.

[nay-seven]

Ok here one,
to use it , i have change a bit the template , don't worry, just transform the 4 first toggle in momentary mode, cause you can choose this directly in Usine now.
For each switch you can choose color ( v r j ) for vert/rouge/jaune and choose betwen T (toggle) or M (momentary)
in the workspace, there's also 4 switches to test, here i simply drag the switch with [CTRL+Shift] to create a bind

LaunchKontrol editor Yan.zip

(76.09 KiB) Downloaded 356 times

[nay-seven]

an other one, i have forgotten the 4 switches on the right side, could be useful.
no color choice possible for these ones, new template.

LaunchKontrol editor Yan 2.zip

(90.06 KiB) Downloaded 892 times

[cmodica]

Thank you very much, you are a master !

I will test them and tell you.
Merci, merci.

[cmodica]

It works very well. It is a very nice patch.
I have so much to learn, and today i learned !
Thank you and take care.

[nay-seven]

Great news, and glad it work well for you !
And yes, take care too, containment is not an easy period but give us time to patch

[cmodica]

Hello.

The Patch works fine. But I should connect my switches and buttons in my workspace with bind to the LaunchControl XL Patch switches. If I use Midi Learn on my switches and buttons, it works if there are in Momentary Mode, but it doesn’t work if I need Toggle Mode. The only way I find is to work with bind between LaunchControl XL Patch and my switches.

Why not, it seems OK. I hope binds doesn’t need too much CPU.

Thank you.

[nay-seven]

Strange , no issue here to use Midi learn, once a switch is set to T on the patch ?
maybe check the switch settings panel/midi and force the toggle mode ?

[cmodica]

You are right! My switches were not in toggle mode. I cleared all my midi learn and restart to learn for all switches. There are now set in toggle mode automatically and everything works fine!
Great and thank you very much.