2D version of the panel-xyz-pad.
Creates a panel where you can display objects (oval or rectangle) in 3D coordinates. This panel allows direct selection and manipulation of the objects with the mouse.
This module is the same than panel-xyz-draw except that all the objects have the same size.
Gets or sets the X position of balls.
Gets or sets the Y position of the balls.
Gets or sets the Z position of the balls.
Array inlet of all separated colors of objects.
Color of the object.
Shape type of the selectors.
Randomizes values or positions.
Resets all the values of the selected object.
It resets to the reset value value for controls and to their default values for panels.
Displayed caption of the object. Click to enter a new name.
Number of objects displayed.
Gets or sets the current view of the 3D module (top,side left,side right,front,rear).
Sends which object is currently manipulated. In multi-touch situation, the nth object is moving if the [nth-1] index of the array is 1.
Wheel information received on each objects.
Gives a list which contains the indexes of selected objects.
Sends an array of values when objects collide with other objects or borders. See physics engine.
Index of the last clicked object on the panel.
Send 1 value when the panel is playing a recorded automation.
Turn Symmetry mode ON or OFF.
Symmetry mode, polar: pan positions keep always the same angle, translation: pan positions keep always the same distances between each other.
When activated, groups are moved in polar coordinates (around the panel center point).
works only in 2D or in the view 3D top
Groups indexes. For example 0;1;1;2;2;2;0;0
means that objects 2,3 are in the group 1 and objects 4,5,6 are in the group 2.
Groups the selected objects together.
comma-text which contains captions of objects.
comma-text which contains hints of objects.
Determines if parameters of this object are saved in the preset-panel.
Parameters of the this object can cross faded when you recall a preset in the grid.
Optional setting, does not appear on all objects.
When ON, this object will be randomized when using the randomize command.
When ON, this object will be reset to its default value when using the reset command of its patch.
Selection modes for children objects in touch screen mode.
Hint text displayed on mouse over.
Background color of the control.
transparent option must be OFF.
Blue background color example.
Determines if the background of the control is transparent or not.
Example, the first module is transparent.
Background color when the control is modified by a remote (MIDI,OSC,etc.).
Optional Filename of the background image.
Only PNG, JPEG and BMP formats are supported.
Use [ctrl+click] to reset.
Example on an panel-xy-pad.
Force the image file to adapt its displayed size to the size of the object.
See manipulate-bitmaps.
Background bitmap input.
Use [CTRL + Click] to reset the input.
Background bitmap output.
Displays or not the border of the control.
8 pixels border on an panel-xy-pad.
Sets the border width of the control in pixel.
8 pixels border on an panel-xy-pad.
Border color of the control.
a yellow border on an panel-xy-pad.
Border color when the control is OFF.
a black OFF border on a switch.
Border color when the control is ON.
a white ON border on a switch.
Thickness of rounded corners.
0 = no rounded corners.
Example on a panel-shape.
Enables or disables the drawing of a border when the control is selected with the mouse.
Displays or not the caption.
Example on a fader.
Caption alignment of the control, left, center or right.
Vertical alignment of the caption, center, top or bottom.
Example on knob: Center, top and bottom.
Example on switch.
Size multiplication factor applied to the caption font.
Example on switch.
Font name of the control caption.
Example with 3 different fonts on switch.
Color of the caption font.
Example on switch.
Italic style for caption font.
Example on switch.
Bold style for caption font.
Example on switch.
Underline style for the caption font.
Example on switch.
See using-drag-drop.
Enables the drag on this control.
Enables or disables the drag&drop possibilities on this control.
Name of the dropped file.
Clears the latest dropped file name.
Determines if the control can be modified by the user. When OFF, the mouse interaction and modifications are disabled so the user can't change the value.
Sets or get the visibility of the control.
Global color of the control. Usine will choose the best contrasted colors according the global color.
When ON the global color of the control is not affected (is isolated) when the parent control global color changes.
Name of the snapshot (which contains the visual properties) loaded when the object is created. By default the snapshots files are located in /Resources/Snapshots/
or /Config/Snapshots
.
the snapshot name can be without extension ie. LIGHT CLASS
instead of LIGHT CLASS.tuknob_tab_design
Determines the Z-order of the control
Example with the first knob on top.
Opacity value of the control.
0 will give a totally transparent control so invisible.
Blur amount applied to the object.
Example of blur.
Be careful, the blur softness use shaders which are not supported by all graphic cards.
It can crash Usine.
Displays or not the header on the panel.
Example on sequenced-lines.
Height of the header in pixels.
Background color of the header.
Determines if the header is drawn as a plain bar (HH5 style) or as small bar in the upper left corner.
plain ON
plain OFF
Determines if the horizontal scroller is visible or not.
The scroller appears only if the container is smaller than the controls inside.
Example of horizontal scroller
Height of the scroller in pixels.
Scroller color.
Scroller opacity.
visible only in god mode, see setup-panel-tab-expert.
Current private id for this control.
If you experience difficulties in Polyphonic mode, try to recreate new id(s) with this button.
Each Patch shared on the local network uses its own ID (identification number). If you experience issues of Patches that don't send information to the good target, this button will rebuild all these id's.
Opens the web browser to display information's or help about the selected object, if it exists.
For more details about information/help creation, see create-help-file.
Determines where the object is visible.
When the location is set to a container which doesn't exist in the patch, Usine try to find in parent patches, the first container available. If no container is available an error message is displayed.
Sets the control as an additional container so any other control can be placed into that container. The additional container is identified by a number.
a button inside a listbox
When ON, will also be visible in the interface-builder-panel.
Gives the mouse state of the control:
In multi-touch environment, can be an array of [0..1] values.
Gives the mouse wheel speed and direction, -1,-2,-3,...=forward, 1,2,3,...=backward.
Enables or disable the mouse wheel action.
Sends a 1 value if the user has [dbl-clicked] on the control.
Determines if the mouse is active on the control.
Gives the mouse X position on the control in relative coordinates from 0=most-left to 1=most-right.
In multi-touch environment, can be an array of [0..1] values.
Gives the mouse Y position on the control in relative coordinates form 0=top to 1=bottom.
In multi-touch environment, can be an array of [0..1] values.
Pressure value on touch-screens.
The pressure value is not available on all touch screens.
Gesture information's.
In touch and multi-touch environment, returns an array of the fingers movements See multi-touch
When ON, the value of the control is reset automatically on mouse up.
When ON, move up-down to rotate a knob, left-right when OFF.
Sends a 1 value when the control is hovered with the mouse.
Sends 1 when the control is mouse overed.
Sends 1 when the control is selected.
Top position of the control in pixels.
Left position of the control in pixels.
Height of the control in pixels.
Width of the control in pixels.
Horizontal position in % [0..1] relative to the parent panel.
Vertical position in % [0..1] relative to the parent panel.
Height in % [0..1] relative to the parent panel.
Width in % [0..1] relative to the parent panel.
Top position in pixels in the interface-builder-panel.
Left position in pixels in the interface-builder-panel.
Width in pixels in the interface-builder-panel.
Height in pixels in the interface-builder-panel.
Rotation angle of the control.
Rotates this control in vertical position.
Zoom scale of the control.
Determines is the control can be zoomed with the wheel mouse.
Determines if the control can be resized with the resize grip.
Determines if the control is minimized or not.
Determines if the control is movable on X axis.
Determines if the control is movable on Y axis.
When ON the control stays inside the parent on X axis.
When ON the control stays inside the parent on Y axis.
TpgControl_Button.floating content parent y
Determines if the control can be resized on its left hand.
Determines if the control can be resized on its right hand.
Determines if the control can be resized on its top hand.
Determines if the control can be resized on its bottom hand.
See physics-engine
Enables physics-engine in this panel.
The physics speed of the control in physics-engine.
When ON, the physics-engine starts with a random speed for each child controls.
When ON, all controls have the same masses in the physics-engine.
The position control is not affected by the physics-engine.
Friction factor in the physics-engine.
Energy conservation coefficient on collision.
Gravity factor on the X axis.
Gravity factor on the Y axis.
Position of the object when the physics engine is reset on X axis.
Position of the object when the physics engine is reset on Y axis.
Angular speed of the control in the physical engine.
Sends a 1 value when the control collides with another control or a border.
Gives information about the collide state in the physics-engine.
Speed vector value on the X axis in the physics-engine.
Speed vector value on the Y axis in the physics-engine.
Automatically reorganize positions of controls in the panel.
Left margin used in reorganization, in pixels.
Interspace between controls used in reorganization, in pixels.
Resizes panels automatically when child controls are moved or resized. Switch it OFF if you use floating panels inside.
Margin in pixel used for the auto resize option.
Adjust the panel width to a multiple of the default rack width.
In unlock mode, snap the control to a grid.
Grid size in pixels when snap to grid is ON.
Displays the toolbar with its icons.
Example ON and OFF
Height of the toolbar % of the global height.
Example toolbar size on a panel.
When ON, the automation recording starts automatically when click on the control.
Deletes the automation curve.
Sends 1 value when the control is playing a recorded automation curve.
Inner zoom factor.
Determines if it is possible to scroll inside the panel when the zoom factor is > 1.
Zoom center point X coordinate.
Zoom center point Y coordinate.
Zoom center point Z coordinate.
Displays a grid inside the panel.
Color of the grid.
Gap between lines in the x plane.
Gap between lines in the y plane.
Gap between lines in the z plane.
Minimum gap between vertical and horizontal lines.
Displays a small circle in the center of the grid.
Color of the center point.
Diameter of the center point.
Displays a circle in the center of the panel.
Diameter of the center circle.
Color of the circle.
Width of the circle line.
Display xyz axis in the center of the panel.
Size of the axis.
Opacity of the axis.
Display also the orthogonal axis.
Invert the Y axis. When ON, the 1 value is on top of the panel, 0 at the bottom.
version 6.0.241021
Edit All Pages